Viking RVDR33025BSSLP Range

User Manual - Page 8

For RVDR33025BSSLP. Also, The document are for others Viking models: RVDR3302, CRVDR3302

PDF File Manual, 28 pages, Read Online | Download pdf file

RVDR33025BSSLP photo
Loading ...
Loading ...
Loading ...
42” min.
(106.7 cm)
13” max.
(
33.0 cm)
6” min.
(15.2 cm)
1
8” min.
(45.7 cm)
3/8”
(0.95 cm)
36”
(
91.4 cm)
29-7/8”
(75.9 cm)
A
Range
Width
“A”
Dimension
30” 30” (76.2 cm)
Clearance Dimensions (Proximity to Cabinets)
8
This range may be installed directly
adjacent to existing 36” (91.4 cm) high
base cabinets.
IMPORTANT: The side trim MUST be
3/8” (.95 cm) above the adjacent base
cabinet countertop. This can be
accomplished by raising the unit using
the adjustment spindles on the legs.
The range CANNOT be installed
directly adjacent to sidewalls, tall
cabinets, tall appliances, or other
side vertical surfaces above
36” (91.4 cm) high. There must be
a minimum of 6” (15.2 cm) side
clearance from the range to such
combustible surfaces above the
36” (91.4 cm) counter height.
Within the 6” (15.2 cm) side
clearance to combustible vertical
surfaces above 36” (91.4 cm), the
maximum wall cabinet depth
must be 13” (33.0 cm) and wall
cabinets within this 6” (15.2 cm)
side clearance must be
18” (45.7 cm) above the
36” (91.4 cm) high countertop.
Wall cabinets above the range must be a
minimum of 42” (106.7 cm) above the
range cooking surface for the full width
of the range. This minimum height
requirement does not apply if a range
hood is installed over the cooking surface.
Note: If a range hood is installed, wall cabinets
above the range have a different minimum
clearance height.
CAUTION
BURN HAZARD
To avoid risk of personal injury;
the use of cabinets for storage
above the appliance may result
in a potential burn hazard. Combustible
items may ignite, metallic items may
become hot and cause burns. If cabinet
storage is used, the risk can be reduced by
installing a rangehood that projects
horizontally a minimum 5" (12.7 cm)
beyond the bottom of cabinets.
Loading ...
Loading ...
Loading ...