Loading ...
Loading ...
Loading ...
28
TROUBLESHOOTING
PROBLEM POSSIBLE CAUSE WHAT TO DO
Dishwasher will
not start
No power. Ensure the dishwasher is plugged in
and the power supply is turned on at
the wall.
The door is not properly closed.
Close the door.
Water tap not turned on. Ensure water is connected and
turned on.
Blocked strainer in water
inlethose.
Check the strainer and clean if
necessary—it is located where the
water inlet hose screws into the tap.
Lower spray
arm rotates
with difficulty
Spray arm holes are blocked by
small items or food particles.
Clean the spray arm. See ‘Care and
cleaning’ for instructions.
Cover of
detergent
dispenser
cannot be
closed
Detergent compartment has
been overfilled.
Remove detergent until the cover
can be closed.
Detergent dispenser is clogged
with remnants of detergent.
Wipe dispenser out with a damp
cloth. Dry the dispenser before
adding detergent.
Remnants
of detergent
stuck inside
dispenser
Compartment was damp when
filled with detergent.
Wipe dispenser out with a damp
cloth. Dry the dispenser before
adding detergent.
Utensils are blocking the
detergent dispenser
from opening.
Ensure there are no large utensils
positioned in a way that will stop the
dispenser cover from opening when
the dishwasher door is closed.
Water
remains inside
dishwasher
after wash
hasended
Drain hose is crimped, bent, or
blocked.
Check the drain hose and straighten
if needed.
Pump is jammed. Call your Fisher&Paykel Authorised
Service Centre or Customer Care.
Filter(s) blocked. Clean the filter(s). See ‘Care and
cleaning’ for instructions.
Foaming Incorrect amount or type of
detergent used.
See section ‘Adding detergent’ or
consult the detergent manufacturer’s
instructions.
Too much egg in the wash load. Increase the amount of detergent.
Rinse aid dosage level too high. Decrease the rinse aid dosage.
Rinse aid spills not wiped up. Ensure that all rinse aid spills are
wiped up when they occur.
Display shows
the letters F, L,
P, C or S
Dishwasher is in
TechnicianMode.
Touch and hold
to exit.
If the Dishwasher remains in
Technician Mode call Customer Care.
Loading ...
Loading ...
Loading ...