Loading ...
Loading ...
HID312AW, HID525AW and HID540AW
Installation and User’s Manual
March 2015
Page 3
Specications
The ice maker-dispenser is designed to be installed
indoors, in a controlled environment. Although
it can operate in a wide range of air and water
temperatures, it will provide the best performance if
not subject to extremes.
Air Temperature Limitations
• Maximum: 100
o
F. or 38
o
C.
• Minimum: 50
o
F. or 10
o
C.
Water Temperature Limitations
• Maximum: 100
o
F. or 38
o
C.
• Minimum: 40
o
F. or 4.4
o
C.
Water Pressure, potable
• Maximum: 80 PSI or 5.5 Bar
• Minimum: 20 PSI or 1.3 Bar
Water Conductivity:
• Minimum: 10 microSiemens/cm
RO water may be supplied to the potable water
system, but if it has less than the above conductivity,
the water level sensor will not detect water and the
unit will not make ice.
Deionized water will not work and isn’t recommended.
Voltage
• Maximum: 126 Minimum: 104
Operating the machine outside of any of the above
limitations is considered abuse and any resulting
damage is not covered by warranty and could cause a
complete loss of warranty coverage.
Warranty Information
The warranty statement for this product is provided
separately from this manual. Refer to it for applicable
coverage. In general warranty covers defects
in material or workmanship. It does not cover
maintenance, corrections to installations, or situations
when the machine is operated in circumstances that
exceed the limitations printed above.
Product Information
The product is an ice maker-dispenser. It is designed
to be hung on a wall over a sink.
• All models require a drain. An internal drain basin
separates the ice storage bin’s drain from other
drains.
• A backow preventer may be required by local
plumbing codes.
• A power cord with NEMA 5-15P plug is included.
• Air cooled models ow air left to right and include
a cleanable air lter.
• Ice or water vending is triggered by touch free
sensors, no other activation method is available.
• For available options and kits, see sales literature.
Scotsman Ice Systems are designed and
manufactured with the highest regard for safety and
performance. They meet or exceed the standards of
UL and NSF.
Scotsman assumes no liability or responsibility of
any kind for products manufactured by Scotsman
that have been altered in any way, including the use
of any part and/or other components not specically
approved by Scotsman.
Scotsman reserves the right to make design changes
and/or improvements at any time. Specications and
design are subject to change without notice.
Model Electrical Condenser Typical Amp Draw Maximum Fuse Size
HID312AW-1A 115/60/1 Air 5.7 - 6 15
HID525AW-1A 115/60/1 Air 7.2 - 8 15
HID540AW-1A 115/60/1 Air 7.2 - 8 15
Loading ...
Loading ...
Loading ...