Loading ...
Loading ...
Loading ...
07 EN EN 08
1. Use the monitor to test the viewing angle from your desired mounting spot.
2. Mark the screw holes with a pencil.
3. Drill 1/5” holes into the wall and then insert the anchors into the holes.
4. Insert the screws through the mounting holes of the wall mount and screw into the anchors.
5. Place the camera on the wall mount.
Press and hold the power button to power on the monitor. Press the menu button to open Menu
Settings.
Menu Settings
Menu Options Description
Brightness
Set the brightness of the screen.
Sleep Mode
Enable to automatically turn off the screen after 1 min, 3 min, 5 min or
Off.
Sound Alert
You can set the baby monitor to alert you when a specific noise level is
detected.
Note
: Surrounding noise might set off false alarm.
Lullaby
Select your desired lullaby song. You can adjust the volume by selecting
the volume button.
Note
: Sound Alert is automatically disabled when Lullaby function is
enabled.
Warning
: Your baby’s cry might be obscured by the sound of a lullaby.
Zoom
Zoom in / out
Alarm
• Set alarm on / off
• Specify the duration when the alarm will sound.
• Set the volume
• Set the temperature alert when it exceeds the specified temperature
• Set an alarm clock
Camera
Add Camera
Note: You can add up to 4 cameras per baby monitor.
Delete Camera
Cycle Cameras
Cycles through the list of connected baby cameras according to the
preset intervals.
Time Set
Set the time on the monitor.
PLACING THE CAMERA
(WALL & CORNER MOUNT)
6
90°vertical installation 180° horizontal wall installation
You can select the way you like to install the camera.
MONITOR MENU
SETTINGS
7
Loading ...
Loading ...
Loading ...