Loading ...
Loading ...
Loading ...
or back. The selector lever automatically re‐
turns to the center position when released.
Selector lever position P is engaged automati‐
cally, refer to page 84, in certain situations.
Selector lever positions
Drive mode D
Selector lever position for normal vehicle oper‐
ation. All gears for forward travel are activated
automatically.
Reverse R
Engage selector lever position R only when the
vehicle is stationary.
Neutral N
The vehicle may be pushed or roll without en‐
gine power in selector lever position N, for in‐
stance in vehicle washes, refer to page 86.
Parking position P
General information
Selector lever position, for instance for parking
the vehicle.
The transmission blocks the drive wheels in se‐
lector lever position P.
Engage selector lever position P only when the
vehicle is stationary.
Before exiting the vehicle, make sure that se‐
lector lever position P is set. Otherwise, the ve‐
hicle may begin to move.
Automatic parking position for a
transmission with a tap-operated selector
lever
Selector lever position P is engaged automati‐
cally in situations such as the following:
▷ After the engine is switched off when the
vehicle is in the radio-ready state, refer to
page 70, or when the ignition is switched
off, refer to page 69, while selector lever
position R, D or M/S is engaged.
▷ If the driver's safety belt is unbuckled, the
driver's door is opened, and the brake
pedal is not pressed while the vehicle is sta‐
tionary and selector lever position D, M/S or
R is engaged.
▷ After the ignition has been switched off
while selector lever position N is engaged.
Engaging selector lever positions: with
a latching selector lever
General information
To prevent the vehicle from creeping after you
select a drive mode, maintain pressure on the
brake pedal until you are ready to start.
Functional requirements
The selector lever can only be taken out of se‐
lector lever position P if the ignition is on or the
engine is running.
Engaging selector lever position D, N, R,
or P
With the vehicle stationary, depress the brake
pedal before shifting out of selector lever posi‐
tion P or N; otherwise, the shift block will not be
deactivated and the shift command will not be
executed.
A selector lever lock prevents the following
faulty operation:
▷ Unintentional shifting into selector lever
position P or R.
Seite 84
CONTROLS
Driving
84
Online Edition for Part no. 01402983336 - X/17
Loading ...
Loading ...
Loading ...