Loading ...
Loading ...
Loading ...
Lights
Replacing a Rear License Bulb
1. Remove the two screws and
remove the license light assembly.
2. Remove the socket from the light
assembly by turning it one-quarter
turn counterclockwise.
3. Pull the bulb straight out of its
socket. Push the new bulb in until
it bottoms in the socket.
4. Turn on the parking lights and
check that the new bulb is
working.
5. Reinstall the socket. Turn it clock-
wise until it locks.
6. Put the license light assembly in
place. Reinstall the two screws and
tighten them securely.
Replacing an Interior Light Bulb
(U.S.: EX)
1. Remove the lens by carefully
prying on the edge of the lens in
the middle with a fingernail file or
a small flat-tip screwdriver. Do not
pry on the edge of the housing
around the lens.
CONTINUED
Maintenance
INTERIOR LIGHT
Main Menu
Table of Contents
▲
▼
Loading ...
Loading ...
Loading ...