GE JCAP760SM2SS - 24" Electric Freestanding Range

User Manual - Page 13

For JCAP760SM2SS. Also, The document are for others GE - General Electric models: JCAS745, JCAP750, JCAP760, JCAP765

PDF File Manual, 45 pages, Read Online | Download pdf file

JCAP760SM2SS photo
Loading ...
Loading ...
Loading ...
Not all features are on all models.
The timer is a minute timer only.
The OFF pad does not affect the
timer.
Make sure the clock is set to the
correct time of day.
Operating
Instructions
Care and Cleaning
Installation
Instructions
Troubleshooting Tips
Safety Instructions
Consumer Support
Touch TIMER pad and hold for
Using the clock, timer and convenience outlet. (on some models)
To Set the Clock
The clock must be set to the correct time
of day for the automatic oven timing
functions to work properly. The time of day
cannot be changed during a timed baking
or self-cleaning cycle.
If the + or pads are not touched within
the display reverts to the original setting.
reenter the time of day.
Touch the START/ON pad until the
time of day shows in the display. This
enters the time and starts the clock.
To check the time of day when the display is
showing other information, simply touch the
TIMER pad. The time of day shows until
another pad is touched.
one minute after you touch the TIMER pad,
If this happens, touch the TIMER pad and
To Set the Timer
The timer does not control oven operations.
The maximum setting on the timer is 9 hours
and 59 minutes.
Touch the TIMER pad.
Touch the + or pads until the
amount of time you want shows in
the display. The maximum time that
can be entered in minutes is 59.
Times more than 59 minutes should
be changed to hours and minutes.
If you make a mistake, touch the TIMER pad and
begin again.
Touch the START/ON pad. The time
will start counting down, although
the display does not change until one
minute has passed.
When the timer reaches :00, the
control will beep 3 times followed by
one beep every 6 seconds until the
TIMER pad is touched.
13
Touch the + or pads.
3 seconds.
Loading ...
Loading ...
Loading ...