Loading ...
Loading ...
Loading ...
en-us Troubleshooting
36
Issue Cause and troubleshooting
Dishware is not dry. Cycle or cycle option has no drying phase, or drying phase is too short.
▶
Select a wash cycle with drying. →
Page12
Some option buttons decrease the drying result.
Water collects in recesses of dishware or silverware.
▶
Position dishware at an angle where possible.
The combined detergent used has a poor drying performance.
1. Use rinse aid to improve drying performance.
2. Use a different combined detergent with a better drying performance.
Extra Dry not activated to improve drying performance.
▶
Activate Extra Dry →
Page29
.
Dishware removed too early or drying process not yet ended.
1. Wait until the program ends.
2. Only remove dishware 30minutes after the program has ended.
Rinse aid used has a limited drying performance.
▶
Use a name-brand rinse aid.
Eco products may have limited effectiveness.
Silverware is not dry. Silverware not arranged properly in the silverware basket or silverware drawer.
Droplets can form on the contact points of silverware.
1.
Arrange silverware individually where possible. →
Page25
2. Avoid points of contact.
Appliance interior still wet after
wash cycle.
Not an error. Condensation drying creates water droplets in the tub. This is normal.
Moisture in the air condenses on the inside walls of the appliance, runs off, and is
pumped out.
No action required.
Food remnants on dishware. Dishware was placed too close together or rack is overfilled.
1. Arrange dishware with sufficient space in between.
The spray jets must reach the surfaces of the dishware.
2. Avoid points of contact.
Spray arm rotation is blocked.
▶
Arrange dishware so it does not obstruct spray arm rotation.
Spray arm nozzles are blocked.
▶
Clean the Spray arms →
Page33
.
Filters are dirty.
▶
Clean the filters.
→
"Cleaning filters", Page32
Filters are inserted incorrectly and/or not engaged.
1. Insert the filters properly.
→
"Filter system", Page32
2. Twist filters into place.
Selected wash cycle is too light.
▶
Select a more intensive cycle.
▶
Adjust the sensitivity of the sensors.
→
"Sensors", Page7
Dishware has been precleaned too intensively. Then the sensors choose a lighter
cycle. Stubborn remnants cannot be entirely removed.
▶
Only remove large remnants of food and do not pre-rinse dishware.
Loading ...
Loading ...
Loading ...