Loading ...
Loading ...
Loading ...
Servicing Your Honda
181
Brakes
Refer to Safety Precautions on page 113.
1.
Make sure the engine is OFF and the parking brake is set.
2.
Remove the rear brake drain bolt (1) and sealing washer (2) from
the bottom of the rear brake panel.
If any water drains, the brake seals must be replaced by your
dealer as soon as possible.
3.
Install the rear brake drain bolt with a new sealing washer and
tighten it to the specified torque:
9 lbf·ft (12 N·m, 1.2 kgf·m)
Draining Water from Brakes
RIGHT REAR
(1) rear brake drain bolt
(1)
(2)
(2) sealing washer
19 TRX500FE2_31HR4850.book Page 181 Wednesday, April 4, 2018 11:48 AM
Loading ...
Loading ...
Loading ...