Loading ...
Loading ...
Loading ...
W
ARNING
Always remove the safety key and battery pack after you
complete the work.
8.3 LED HEADLIGHTS
2
9
1
1. When the mower is ready to start, you may grab either of
the start handles (2) to turn on the LED headlights (9).
2.
Release the start handles to turn off the headlights.
8.4 EMPTY THE GRASS CATCHER
1. Stop the machine.
2.
Remove the safety key.
3. Remove the battery pack.
4. Open the rear discharge door and hold it.
5. Hold the grass catcher by its handle and unhook it from
the door rod.
6. Close the rear discharge door.
7. Empty the grass catcher.
8.5 OPERATION TIPS
• Do not try to override the operation of the start button or
start handles.
•
Do not tilt the machine when you start it.
• Do not put hands or feet near or below the turning parts.
• Keep the discharge chute clean.
• Do not cut wet grass.
• Higher blade height is necessary for new or thick grass.
• Clean the bottom of the mower deck after each use.
Remove grass clippings, leaves, dirt, and other debris.
9 MAINTENANCE
W
ARNING
Remove the safety key and battery pack from the machine
before maintenance.
W
ARNING
Keep the motor and battery pack free from grass, leaves or
too much grease.
CAUTION
Use only approved replacement parts.
CAUTION
Do not let brake fluids, gasoline, petroleum-based materials
touch the plastic parts. Chemicals can cause damage to the
plastic, and make the plastic unserviceable.
CAUTION
Do not use strong solvents or detergents on the plastic
housing or components.
NOTE
Recommended tightening torque (blade): 33-37 Nm.
9.1 REPLACE THE BLADE
25
27
26
W
ARNING
Use only approved replacement blades.
W
ARNING
Wear heavy gloves or wind cloth around the blade when
you touch the blade.
12
English
EN
Loading ...
Loading ...
Loading ...