Loading ...
Loading ...
Loading ...
9
Unpacking
Carton Contents:
• Hybrid snow blower with handle
• EcoSharp
®
40 V 4.0 Ah battery
• EcoSharp
®
40 V battery charger
• Handle knobs/Deector knobs (4)
• Square J-bolts (2)
• Carriage bolts (2)
• Rubber washers (2)
• Manual with registration card
1. Carefully remove the hybrid snow blower and check to
see that all of the above items are supplied.
2. Inspect the product carefully to make sure no breakage or
damage occurred during shipping. If you nd damaged or
missing parts, DO NOT return the unit to the store. Please
call the Snow Joe
®
+ Sun Joe
®
customer service center at
1-866-SNOWJOE (1-866-766-9563).
NOTE: Do not discard the shipping carton and packaging
material until you are ready to use the hybrid snow blower.
The packaging is made of recyclable materials. Properly
dispose of these materials in accordance with local
regulations or save the packaging for long-term product
storage.
IMPORTANT! The equipment and packaging material are
not toys. Do not let children play with plastic bags, foils
or small parts. These items can be swallowed and pose a
suocation risk!
Assembly
Assembling the handles
1. For easy assembly, the snow blower comes equipped with
most of the parts already connected. In just a few simple
steps, your snow blower will be ready to go. To engage
the handle, pull up on the upper frame (Fig. 1).
2. Secure the connection of the middle handle assembly to
the upper handle by fastening the handle locks on each
side (Fig. 2).
3. Secure the connection of the middle handle assembly
to the lower handle using 2 handle knobs and 2 square
J-bolts and tighten on each side (Figs. 3 & 4).
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Handle knob
Square
J-bolts
Loading ...
Loading ...
Loading ...