Loading ...
Loading ...
Loading ...
PROBLEM POSSIBLE CAUSE
No power • A fuse may be blown or the circuit breaker
tripped
• Plug not fully inserted into the wall outlet
Internal temperature not cold enough • Temperature setting is too warm
• Door is not shut properly or opened excessively
• Recently added a large quantity of warm food
to the cabinet
• Close proximity to heat source or direct sunlight
• Ambient temperature or humidity is very high
Appliance runs continuously • Temperature setting is too cold
• Door not shut properly or opened excessively
• Recently added a large quantity of warm food
to the cabinet
• Close proximity to heat source or direct sunlight
• Ambient temperature or humidity is very high
Danby Consumer Care: 1-800-263-2629
Hours of operation:
Monday to Thursday 8:30 am - 6:00 pm Eastern Standard Time
Friday 8:30 am - 4:00 pm Eastern Standard Time
Information in this manual is subject to change without notice.
7
TROUBLESHOOTING
ERROR CODE DESCRIPTION
E0 Environmental temperature sensor fault
E1 Temperature control sensor fault
L1 Storage module communication failure
EH Temperature sensor warning - Internal temperature is 5 degrees higher than the set
temperature for an extended period of time
EL Temperature sensor warning - Internal temperature is 5 degrees lower than the set
temperature for an extended period of time
Dr Door open alarm - This alarm will sound when the door has been open for more than
3 minutes
Loading ...
Loading ...
Loading ...