Loading ...
Video Instructions are available at www.fhseatcovers.com/installation
Rear bench cover/Seat (bottom) cover:
1. Find the rear seat cover from the package, it is the one with the tag
labeled BOTTOM located on the border inside of the cover. (It looks
very similar to the backrest cover except it’s smaller in size and has 3
pieces of mesh cloth attached to it.)
To lift up your bench seat, locate the control on the bench and push to
yank it up.
2. Fit the cover over seat and secure it by fastening the straps on the
bottom of the seats. Also fasten the elastic loops together tightly for a
and straps will be hidden underneath the seat. Or you can just tuck in
the mesh cloth underneath the seat. The installation will be easier if
you are able to lift up the seat.
Rear bench cover/backrest cover:
you can cut a line from the edge of the backrest cover to install the
backrest cover. The material will not rip.
The backrest cover is the one labeled ‘BACKREST’ tag on the
border inside the cover.
2. Fit the cover on the backrest. Push the bottom straps through seat
crevice to the back and fasten the straps from the back side of the
htiw spool eht tcennoc osla nac uoY .revoc tserkcab eht llatsni ot reisae
supplied snaps (this step is optional). Or you can just tuck in the mesh
cloth on the side of the seat.
cut two small holes at where the belt buckles are in order to pull the belt
buckles out. The material will not tear up.
To split or fold the rear bench:
Based on the position of the bench split, unzip the corresponding zipper
on the backrest or bottom seat cover, this will allow you to fold the bench
up and down. Unzip one zipper from the bottom. We also include a set of
mesh cloth with zippers to cover the exposed part.
You can unzip the zipper in the middle to allow armrest/cup holder down.
Make sure to unzip from the bottom not the top of the cover.
Rear headrest cover:
Fit the headrest cover over rear bench headrest. Cut two tiny holes on
top of the backrest cover where the headrest needs to be inserted back.
DO NOT cut anything before you are completely sure the backrest cover
the rim for a smoother look (this step is optional), then put the headrests
back. Fasten the straps to secure headrest covers.
Note – Rear seat belt adjustment
on the backrest, make sure seatbelt is on top of the cover, not beneath
the cover. Then cut a slit from the edge of the cover where the seatbelt
comes out.