Loading ...
Loading ...
Loading ...
9
Installation
Installing the Anti-Tip
Bracket
CAUTION
If your Wine Cooler/Beverage Center
is not located under a counter top
(free standing), you must use an
anti-tip bracket installed as per these
instructions. If the Wine Cooler/
Beverage Center is removed from its
location for any reason, make sure that
the bracket is properly engaged when
you push the Wine Cooler/Beverage
Center back into the original location.
If the bracket is not properly engaged,
there is a risk of the Wine Cooler/
Beverage Center tipping over, causing
property or personal injury if you or a
child stand, sit, or lean on an open shelf.
CAUTION
Any finished flooring should be
protected with appropriate material to
avoid damage when moving the unit.
ALL UNITS CAN TIP
Tools you will need:
WARNING
This appliance may tip when shelves
are extended, causing damage or
injury. If this appliance is used in a FREE
STANDING application, the anti-tip
bracket must be installed following these
instructions!
NOTE
While performing installation described
in this section, gloves, safety glasses, or
goggles should be worn.
Safety
goggles
Stud
finder
Screwdriver
Gloves
Hammer
or Mallet
Electric drill
with
3/8" drill bit
Wrench
IMPORTANT
Determine the final location of the
appliance before attempting to install
the bracket. You will need to choose
one of the three installation methods
below.
Installation methods:
1. DRYWALL
2. WOOD FLOOR
3. CONCRETE FLOOR
Anti-tip bracket installation
The bracket can be installed at the left
bottom OR right bottom of the back of
the unit. You can choose which side is
convenient for you.
Loading ...
Loading ...
Loading ...