Loading ...
Loading ...
Loading ...
22
If you are unable to nish the descaling procedure
If the machine gets stuck in the descaling procedure, you can press the on/off
button.This allows you to complete the descaling procedure. Follow the steps
below to make sure your machine is ready to brew coffee again.
2 Fill the water tank with fresh tap water up to the MAX indication and slide the
water tank back into the machine.
3 Empty the bowl and place it back onto the drip tray under the hot water/steam
wand.
4 Press the espresso button and brew a cup of espresso. Repeat this twice.
5 Turn the control dial to the hot water icon.
6 Let hot water ow out of the hot water/steam wand until the ‘water tank empty’
light lights up continuously.
Note: If you want to interrupt the water ow, turn the control dial back to the coffee
bean icon. To restart the water ow, turn it back to the hot water icon.
7 Remove the drip tray, rinse it and place it back.
8 Reattach the classic milk frother.
9 Remove the water tank and rinse it.
10 Reinstall the Intenza+ water lter (if present).
11 Fill the water tank with fresh tap water up to the MAX indication and slide the
water tank back into the machine.
12 Press the on/off button to switch off the machine.
- When you switch the machine back on, it is ready for use again.
22
ENGLISH
4219-450-08901 MANUAL GAG. BESANA EN-ES-PT V2.indd 22 03/09/2020 11:05:19
Loading ...
Loading ...
Loading ...