Knob Installation
IMPORTANT NOTE: Depending on the model, additional
knobs may be included with this kit but not utilized.
1) Remove knobs from packaging and discard packag-
ing material. Using the chart as reference, identify the
icon etched next to each bezel to determine the correct
placement of each knob. For dual fuel ranges, refer to
the illustration below for oven selector knob place-
ment. Once proper placement has been determined,
discard any additional knobs.
2) If any of the knobs "stick" when pressed, remove the
knob and slightly loosen the two bezel screws. Refer
to the illustration below. Once the proper alignment
has been achieved, tighten screws and reinstall knob.
Dual Fuel Range and
Sealed Burner Rangetop Knob Installation
ICON
BEZEL
SCREW
Knob placement.
Oven selector knob.
(dual fuel range only)
NYLINER
OVEN SELECTOR KNOB
804624
Page 1 of 1804624 REV-C 12/2011
Do not place knobs or bezels in dishwasher. Do not
soak or use abrasive cleaners. To clean, wipe with a
damp cloth and mild detergent and water; rinse and dry.
Icon Text On Knob
Hi-Low and Simmer Hi-Low
100
F to 450
F
Off and Hi
Off and Hi
wolfappliance.com 800.222.7820
