Loading ...
Loading ...
Loading ...
820685
40
INTERRUPTIONS AND CHANGING
THE PROGRAMME
MANUAL INTERRUPTION
To stop and cancel a washing programme, press the (1) ON/OFF/RESET button and hold it for
more than 3 seconds. Signal lights will flash on the display. At the same time, the washing machine
pumps the water out of the washing machine drum. When the water is pumped out, washing
machine door will be unlocked. If the water in the washing machine is hot, the washing machine will
automatically cool it and pump/drain it out.
PERSONAL SETTINGS
Basic or default settings for each washing programme can also be changed. When you select the
programme and additional functions, you may store such combination by pressing the (3) START/
PAUSE button and holding it for five seconds. S C will appear on the display.
The programme will remain stored until it is changed using the same procedure.
Personal settings can also be reset to factory settings in the user menu.
PERSONAL SETTINGS MENU
Switch on the washing machine by pressing the (1) ON/OFF/RESET button. Simultaneously press
the (6) PREWASH and (10) START DELAY positions to open the Personal Settings Menu. Signal
lights for POWER SAVE, TIME SAVE, and WATER EXTRA (HIGH WATER LEVEL) will light up
on the display unit. Number 1 will appear on the LED display, which also indicates the settings
function. Rotate the programme selector knob (2) to the left or to the right to choose the function
to change. Number 1 indicates sound settings and number 2 indicates resetting of Personal
programme settings to factory defaults. If the desired settings are not selected in 20 seconds, the
programme will automatically return to main menu. Press the (7) SPIN (SPINNING RATE/DRAIN/
PUMP STOP)position to confirm the desired functions and their settings; press the (6) PREWASH
position to go back one step. Acoustic signal volume can be set at four levels (0 means the sound
is off; 1 means that the button sound is activated; 2 means low volume, and 3 means high volume).
Choose the volume level by rotating the programme selector knob (2) to the left or to the right. The
lowest setting means that the acoustic signal is switched off.
PAUSE BUTTON
The washing programme can always be stopped by pressing the (3) START/PAUSE button. The
washing programme is temporarily paused when the time remaining until programme completion
is flashing on the display unit . If there is no water in the drum and water temperature is not too
high, then the door will unlock after a certain period of time, and they can be opened. To resume
the washing program, first close the door and then press the key (3) START/PAUSE button.
Loading ...
Loading ...
Loading ...