Loading ...
Loading ...
Loading ...
Fastening the Appliance in the
Recess - Figure 17
Fasten the appliance in the recess through the pre-
mounted securing plates at left and right on the appli-
ance housing using screws 4 x 16 mm. Then click the
covers supplied into place.
Leveling the Appliance - Figure 16
1. Adjust the height of the appliance at the front by
twisting the leveling feet
1
. Use the open-ended
spanner provided.
Turn the spanner counterclockwise to raise the appli-
ance front and clockwise to lower it. Position the
spanner accordingly
(Figure 16 -
1).
2. Adjust the height of the appliance at the rear by turn-
ing the adjusting bolts
2
. Use a 1/4" box spanner or
the Torx 25 wrench provided.
3. Rotate leveling feet
1
until firmly in place against the
floor.
WARNING!
To prevent the appliance from tipping
forward the leveling feet
1 (Figure 16)
must have contact with the floor.
Figure 17
Figure 16
10
I
nStallatIon
Loading ...
Loading ...
Loading ...