Loading ...
Loading ...
Loading ...
There
are 6 levels of salt consumption in all.It is recommended to select the level according to below table:
Step
2: select a certain level of salt consumption
Contact
your local water board for information on the hardness of your water supply.
Press the Start/pause button to select the proper set according to your local environment,
the sets will change in the following sequence: H1->H2->H3->H4->H5->H6;
Step
3: Exit the status of salt adjustment
Without
any operation in five seconds, the machine will exit from set mode, the machine is into standby status,
1)
German
degree of measurement for the water hardness
2)
millimol,
internationel unit for water hardness
*) factory setting
Note:
B. Fill
the Rinse Aid Dispenser
The
rinse aid is released during the final rinse to prevent water from forming droplets on your dishes. That can leave
spots and streaks. It also improves drying by allowing water to sheet off the dishes. Your dishwasher is designed to
use liquid rinse aids. The rinse aid dispenser is located inside the door next to the detergent dispenser. To fill the
dispenser, open the cap and pour the rinse aid into the dispenser until the level indicator turns completely black.
The volume of the rinse aid container is about 110ml.
Rinse
Aid Dispenser
Function
of Rinse Aid
Rinse
aid is automatically added during the last rinse, ensuring thorough rinsing, and spot and streak free drying.
5
Setting
on the
water softener
Digital display stalls
1
Rapid
2
3
4
5
dH
W
ater Hardness level
mmol/l
1)
2)
6
*
0-5
0-0.9
6-11 1.0-2.0
12-17
18-22
23-34
35-45
2.1-3.0
3.1-4.0
4.1-6.1
6.2-8.0
S
pecial & Rapid
S
pecial
Glass & Rapid
Glass & Special
Glass
Loading ...
Loading ...
Loading ...