Loading ...
Loading ...
Loading ...
7
General maintenance
CLEAN
Use a broom or long-bristle brush to clean any
grass clippings or other loose debris after mowing.
NOTE: Do not use a garden hose to wash
your mower.
DRY
Keep your mower dry to prevent rust.
Spraying with a rust preventative is acceptable. Do
not use solvents such as mineral spirits or kerosene.
LUBRICATE (see diagram to the right)
Treat moving parts at least once a season and prior
to winter storage with a silicone-based lubricant.
Lubricating any time the mower gets wet will help
prevent rust.
INSPECT
Inspect your blades at least once a season and any
time your mower strikes a hard object. See page 8
Drive Chain (A): Lubricate
through hole while slowly
rolling the mower forward to
move the chain.
Rear Wheel Bearings (B):
Spray between each wheel and
side plate.
Cutting Reel Bearings (C):
Spray both ends of the cutting
reel shaft, located under the
grass chute (D).
Front Fork Assembly (E):
Spray both ends.
Cut Height Adjustment Lever
(F): Spray the lever through
the slot in the cover (G).
BB
EE
A
F
CC
D
G
Loading ...
Loading ...
Loading ...