Loading ...
Loading ...
Loading ...
Owner's Manual 13
ENGLISH
Operating Instructions
❏ During auto clean function, moistures left in indoor units after cooling operation or healthy dehumidification
operation can be removed.
This function operate when the unit is turned off.
• Press the Auto Clean button.
c
• is displayed on the display screen.
If the Auto Clean function is reserved, whenever the unit is turned off, the indoor fan is
still running for about 30 minutes internally without cooling or dehumidification
operation. Also the louver is closed.
This dries up any remains of moisture & cleans the unit internally.
1. Press the Set/Clear button for 3seconds.
p
- The AM/PM icon flickers at the bottom of the display screen.
2. Press Time Setting buttons until the desired time is set.
o q
3. Press the Set/Clear button.
p
1. Press ON or OFF button.
m n
2. Press Time Setting buttons until the desired time is set.
o q
3. Press the Set/Clear button.
p
Check the indicator for A.M. and P.M.
To cancel the Timer Setting
NOTE
• If you wish to cancel all timer setting, press the SET/CLEAR button.
• In order to cancel the timer settings individually, press the Timer button to select Reserved 'On' or
Reserved 'Off'. And then press the Set/Clear button aiming the remote controller at the signal receiver.
(the timer lamp on the display will go off)
Timer Setting
Setting the Current Time
Auto Clean(Optional)
Loading ...
Loading ...
Loading ...