Loading ...
Loading ...
Loading ...
No
Description
1
Thermostat
2
Refrigerator Glass Shelf
3
Crisper Cover
4
Crisper
5
Frozen Drawer
6
Adjusting foot
7
Water Tank
8
Bottle frame
The most energy-saving configuration requires dr
awers, food box and shelves to be positioned in t
he product, please refer to the above pictures.
Due to technological innovation, the descriptions
of the product in this manual may not be
completely consistent with your refrigerator.
Details are in accordance with the material item.
Preparations for use
Installationlocation
1. Ventilation condition
The position you select for the refrigerator
installation should be well-ventilated and has less
hot air. Do not locate the refrigerator near a heat
source such as cooker, boiler, and avoid it from
direct sunlight, thus guaranteeing the
refrigeration effect while saving energy
consumption. Do not locate the refrigerator in
the damp place, so as to prevent the refrigerator
from rusting and leaking electricity. The result of
the total space of the room in which the
refrigerator is installed being divided by the
refrigerant charge amount of the refrigerator
shall not be less than 8 g/M
3
.
Note: The amount of refrigerant charged for the
refrigerator can be found on the nameplate.
2. Heat dissipation space
When working, the refrigerator gives off heat to
surroundings. Therefore, at least 300
mm of free
space should be spared at the top side, more
than 100 mm on both sides, and above 50 mm at
the back side of the refrigerator.
3. Level ground
Place the refrigerator on the solid and flat ground
(floor) to keep it stable, or else, it will give rise to
vibration and noise. When the refrigerator is
placed on such flooring materials as carpet, straw
mat, polyvinyl chloride, the solid backing plates
should be applied underneath the refrigerator, so
as to prevent color change due to heat
dissipation.
Unobstructed ventilation shall be
maintained around the appliance or in an
embedded structure.
Preparations for use
1. Standing time
After the refrigerator is properly installed and
well cleaned, do not switch it on immediately.
Make sure to energize the refrigerator after more
than 1 hour of standing, so as to ensure its
normal operation.
2. Cleaning
Confirm the accessory parts inside the
refrigerator and wipe the inside with a soft cloth.
3. Power-on
Insert the plug into the solid socket to start the
compressor. After 1 hour, open the freezer door,
if the temperature inside the freezer
compartment drops obviously, it indicates the
refrigeration system is working normally.
4. Storage of food
After the refrigerator runs for a period of time,
the internal temperature of the refrigerator will
be automatically controlled according to the
user’s temperature setting. After the refrigerator
is fully cooled, put in foods, which usually need
2~3 hours to be fully cooled. In summer, when
the temperature is high, it takes more than 4
hours for the foods to be fully cooled (Try to
open the refrigerator door as less as possible
before the internal temperature cools down).
If the refrigerator is installed in the
moisture place, make sure to check whether the
ground wire and leakage circuit breaker are
normal. If vibration noises are produced due to
the refrigerator contacting the wall or if the wall
Loading ...
Loading ...
Loading ...