*MFL71140701*
Desktop Stand
Owner's Manual
ST-60UL3RB
ST-70UL3DT
SPECIFICATIONS
Model Width x Height x Depth Weight
ST-60UL3RB
69 x 79 x 255 (mm)
2.7 x 3.1 x 10.0 (inches)
0.2 (kg)
0.4 (lbs)
ST-70UL3DT
120 x 95.5 x 297 (mm)
4.7 x 3.7 x 11.6 (inches)
0.7 (kg)
1.5 (lbs)
Accessories
12 14 16 20
Owner's Manual
Screws (M4 x L20)
6 EA
Stand
(1811-REV00)
www.lg.com
Copyright © 2018 LG Electronics Inc. All Rights
Reserved.
Printed in Korea
Model Monitor Signage Model
ST-60UL3RB 60UL3E-BJ
ST-70UL3DT 70UL3E-TJ
ENGLISH
※ The illustrations in this manual are provided to help
our customers’ understanding of the product and
may differ from the actual product.
IMPORTANT PRECAUTIONS
Please read this manual carefully and retain it for
future reference.
WARNING
When lifting or moving
the product, at least two
people are required due to
the heavy weight of the
product.
The product may fall down,
causing a malfunction or
injury.
Do not let children hang on
or climb onto the monitor.
The monitor may fall down,
causing an injury or even death.
CAUTION
Do not install the product
in a place which is unstable
or vibrating or a place
where the product is not
completely supported such
as a shaky shelf or a tilted
place.
The product may fall down or
overturn, causing an injury or
malfunction.
Put the product on a flat
and firm floor.
The product may fall and
cause an injury.
When moving or handling a product assembled
with the Desktop Stand, be cautious about
damaging the exterior of the product.
When there is a stain or fingerprint left on the
surface, wipe it off gently.
When removing a stain, do not use excessive force.
Wiping with excessive force may cause scratches or
discoloration on the product.
How to Assemble the Stand
WARNING
▪ When assembling the Stand, put the product on a
table or a flat floor with its screen facing downward.
Here, first put a soft and fluffy cloth on the place,
and then put the product on top of it to prevent the
screen from being damaged.
▪ When assembling the Stand, check if the screws
are completely fastened. (If they are not completely
fastened, the product may lean forward after being
installed.) Avoid fastening the screws with excessive
force because otherwise the joint part of the screws
may be worn out, and the screws might come off.
▪ When assembling the product, do not use foreign
substances (oil, lubricant, etc.) on the screws. (It
may cause damage to the product.)
CAUTION
▪ Before installing a wall mount support, disassemble
the Stand by conducting the method to assemble
the Stand in a reverse order.
ENGLISH
B
A
B
A
4
B
A
5
2
B
A
B
A
A
B
1
A
B
A
B
A
B
A
B
3
B
A
B
A
A
B
A
B
3
3
60UL3E
ENGLISH
Mounting on a Table
Lift and tilt the monitor into its upright position on a
table.
- Leave a 10 cm (4 inches) (minimum) space from
the wall for proper ventilation.
10 cm
10 cm
10 cm
10 cm
(4 inches)
▪ Do not apply foreign substances (oils,
lubricants, etc.) to the screw parts when
assembling the product. (Doing so may
damage the product.)
▪ If you install the monitor on a stand,
you need to take actions to prevent the
product from overturning. Otherwise, the
product may fall over, which may cause
injury.
▪ Do not use any unapproved items to
ensure the safety and product life span.
▪ Any damage or injuries caused by using
unapproved items are not covered by the
warranty.
▪ Make sure that the screws are fastened
tightly. (If they are not fastened securely
enough, the monitor may tilt forward after
being installed.)
▪ Do not fasten the screws with excessive
force otherwise they may be worn out and
become loose.
▪ Only use the authorized stand and wall
mounting bracket made specifically for LG
products.
- Pursuant to Consumer Protection Law, LG
Electronics will not be held responsible for
any product malfunction, material damage
or injury caused by using products not
authorized by LG Electronics.
Securing the product to a
wall (optional)
1 Insert and tighten the eye-bolts, or product brackets
and bolts on the back of the product.
- If there are bolts inserted at the eye-bolts position,
remove the bolts first.
2 Mount the wall brackets with the bolts to the wall.
Match the location of the wall bracket and the eye-
bolts on the rear of the product.
3 Connect the eye-bolts and wall brackets tightly with
a sturdy rope. Make sure to keep the rope horizontal
with the flat surface.
• Use a platform or cabinet that is strong and large
enough to support the product securely.
• Brackets, bolts, and ropes are optional. You can
obtain additional accessories from your local dealer.
