Loading ...
Loading ...
Loading ...
20
TRANSFER FRESH FOOD
DOOR HANDLE TO THE RIGHT
Stainless steel handle:
Remove the two
screws holding the
handle to the top of
the door. Loosen the
set screw with the
3/32″ Allen wrench
(supplied) and remove
the handle. Remove
the handle fastener
with the 3/16″ Allen
wrench (supplied).
Transfer the
fastener to the right
side and move the plug
button to the left side
of the fresh food door.
Plastic handle:
Remove the two
screws holding the
handle to the top of
the door. Slide the
handle up on the
fastener and remove
the handle. Remove
the handle fastener
with the 3/16″ Allen
wrench (supplied).
Transfer the
fastener to the right
side and move the
plug button to the left side of the fresh food door.
7
After removing the handle: Move the small plug
buttons from the top right side of the door top and
insert them into the holes on the opposite side.
Small Plug
Buttons
Move the large plug button from the left edge of the
door and insert it into the hole on the opposite side.
Plug Button
REVERSING THE DOOR SWING (CONT.)
Installation Instructions
TRANSFER CENTER HINGE
BRACKET TO THE LEFT
Remove the center hinge bracket by removing
the three screws.
NOTE: Keep these screws with the hinge bracket.
They are long screws and will be used when installing
the hinge on the other side.
Remove the mullion cover from the left side using
the thin flat blade. Assemble it to the right side.
Remove the screw from the left side of the cabinet.
Screw it into the hole on the right side.
Place the hinge bracket over the holes at the
center left side of the cabinet. Insert and tighten
the three long screws.
Replace the cap by snapping it over the screw with
your finger.
5
TRANSFER DOOR STOPS
On each door, remove the door stop on the right side
of the bottom of the door by removing the two screws.
Install the door stop on the left side.
6
Screw Cap
Mullion Cover
1
2
3
1
2
3
4
Fastener
Fastener
Bottom of Door
(Right Side)
Bottom of Door
(Left Side)
Plug
Button
Plug
Button
Loading ...
Loading ...
Loading ...