Loading ...
Loading ...
Loading ...
17
Note
When starting up for the first time, all of the LEDs initially light up. The air cleaner is then set to the lowest
fan speed and the ioniser is activated.
Note
If the “Filter reset” light above the on/o button is flashing, you must replace the combi filter. To do this,
follow the instructions in the “Filter change” section.
6.2 Fan speed
The air cleaner has three fan speeds: I (low), II (medium) and III (high).
•
To switch between the individual fan speeds, press the fan speed button . The fan speed that is currently
set lights up on the control panel.
6.3 Ioniser/Sleep mode
Ioniser Sleep mode Note
1 x press ON OFF „ION“ LED illuminates
2 x press ON ON „ION“ LED illuminates
„Sleep“ LED flashes
3 x press OFF ON „ION“ LED goes out
„Sleep“ LED flashes
4 x press OFF OFF „Sleep“ LED goes out
If sleep mode is activated, all the LEDs in the operating panel automatically switch o after 10 seconds.
To deactivate sleep mode, press any button on the operating panel.
6.4 Timer function
The air cleaner features a timer function that you can use to determine the number of hours the air cleaner
should run for before it automatically switches itself o. The air cleaner has three timer periods: 2H (twohours),
4H (four hours) and 8H (eight hours).
•
To switch between the individual timer periods, press the TIMER button ( ) The TIMER period that is
currently set lights up on the control panel. The air cleaner will now automatically switch o after the set
number of hours has passed.
•
To switch o the timer, repeatedly press the TIMER button ( ), until the light above the TIMER button goes
out. The air cleaner will now clean for an unlimited period.
Loading ...
Loading ...
Loading ...