Loading ...
Loading ...
Loading ...
15
B O S C H
* Model dependent
5 Hold the iron over a sink. Press the
“clean” button (10) and shake the iron
until approximately one third of the water
capacity of the tank is evaporated.
Boiling water and steam will come out,
carrying scale or deposits that might be
there.
6 Release the “clean” button, and gently
shake the iron for some seconds.
7 Repeat the steps 5 and 6 three times
until the tank is empty.
x 3
8 Then plug the iron in and heat it up again
until the remaining water has
evaporated.
Push the “clean” button a few times
more to clean the valve.
9 Unplug the iron and let the soleplate (7)
cool down. Wipe the soleplate with a
damp cotton cloth only.
C “Calc’nClean” with descaling liquid *
For deep descaling, it is recommended to
use the descaling liquid especially
developed by Bosch. This procedure should
be carried out every 3 months.
1. Fill the water tank (11) with tap water
mixed with a measure (25 ml) of the
descaling liquid (17 *).
2. Then follow the procedure described
above in section “Calc’nClean” (steps 2 to
9).
The descaling liquid may be purchased
from our after-sales service or specialist
shops.
Name of accessory: TDZ1101
Loading ...
Loading ...
Loading ...