Loading ...
Loading ...
Loading ...
12
Using the tray on its own
Get your food ready
• Open the lid – fig.1.
• Remove the 2in1 spoon – fig.3.
• Lift the handle up – fig.4 and remove the tray handle – fig.5.
• Fit the handle on the tray – fig.6.
• Remove the tray – fig.7.
•
Place your food on the tray making sure you always keep to the
quantities recommended in the cooking tables and/or the recipe book
(please see “"Cooking table for 2in1"” for tray quantities). Never exceed
the "MAX“ level marker shown on the centre of the tray
– fig.22.
• Put the tray back in the appliance
• Put the 2in1 handle back, then fold it away.
• Close the lid.
Start the cooking
• Connect the detachable power cord to the appliance and plug it in
– fig.13.
• Push the switch 0/| – fig.14, the appliance will make a beep sound
and the screen displays 00.
• Adjust the cooking time using the button (see “Cooking table”).
• Select the type of food you want to cook in the tray using the
button
– fig.23 and 24.
press once
press twice
press three times
press four times (for desserts and fruit)
• Press the start button . The minute countdown starts. The
countdown will only be displayed in seconds when there is less than a
minute left.
• You can adjust the cooking time at any time by pressing on the
buttons .
Remove your food
• When the cooking is finished, the timer will sound and the screen will
start flashing and displaying 00 - : the appliance automatically stops
cooking your food. You can stop the buzzer by pressing on the start
button
– fig.19.
• Open the lid.
• Clip the handle on to the tray
– fig.26.
• Remove the tray.
• Serve your food.
2 in1
When using the tray on its
own, do not put food into
the bowl.
Opening the lid stops the
cooking. You can resume
cooking by pressing on the
start button after it has
been switched off.
Once the lid has been open
for 2 minutes the appliance
will go into stand-by mode.
ACTIFRY2EN1_5087420_Mise en page 1 29/04/12 08:43 Page12
Loading ...
Loading ...
Loading ...