Loading ...
Loading ...
Loading ...
12
English English
13
SETTING UP THE SMART LOCK
Pair Your Phone with Smart Lock
Note:
The lock will not lock automatically before the setup has completed. To avoid
being locked outside, pair your phone with the Smart Lock and set an access
code for unlocking the door.
To pair your phone with the Smart Lock:
1. Scan the QR code on the back of the Smart Lock to get Bluetooth information of the
Smart Lock. Follow the on-screen instructions to complete the setup.
2. Pair your phone with the Smart Lock via Bluetooth. Your phone will search for the
Smart Lock’s Bluetooth and then connect.
• Waiting to pair: The LED indicator ashes blue.
• Paired: the LED indicator turns steady blue for 5 seconds
.
Note:
• The user that is paired is the only administrator and can authorize other users
to use the lock.
• Press and hold the Setup button again, the lock will return to default settings.
All the settings will be erased and need to be reset. DO NOT press and hold
the button if unnecessary.
Calibrate Smart Lock
After the Smart Lock is successfully paired with your phone, the eufy Security app will
prompt you to calibrate the door lock.
Make sure you close the door before calibrating the Smart Lock. When the door is closed,
the door sensor will record the exact locked position so that the door will automatically
lock if the door is properly closed.
To calibrate the Smart Lock, follow the on-screen instructions to complete the process.
• Successfully calibrated: The button LED turns white for 2 seconds and then off.
The voice prompt “calibration complete” can be heard.
• Fail to calibrate: The button and status LED turn solid red for 2 seconds and then
off. The voice prompt “The deadbolt is stuck. Please return to the installation and
try again.” can be heard.
Note:
If the eufy Security app fails to calibrate the lock, check whether the door has
been installed correctly and try again.
Set Access Code
After the lock is calibrated, the eufy Security app will prompt you to name your Smart
Lock and set an access code. Follow the on-screen instructions to complete the process.
The access code should be 4 to 8 characters.
Note:
If you do not set the passcode and click “Return”, a message “initialization
unsuccessful” will appear. Click the card to enter the Smart Lock page. The
message “Continue or remove the device” will appear.
Set Scramble Passcode
A scramble passcode is a series of random numbers that you can input to prevent
others from spying on your actual access code. It is ideal for those living in a condo with
neighbors passing by all the time.
To set a scramble passcode, go to Settings on the eufy Security app. The scramble
passcode should be no more than 12 digits in total.
Example
Access Code: 123456
Scramble Passcode Method
1. 123456xxxxxx
2. xxxxxx123456
3. xxx123456xxx
Loading ...
Loading ...
Loading ...