Loading ...
Loading ...
Loading ...
1 If you want to mix sugar or ice into the juice, place the stirrer in
the jug (Fig. 6).
Note: Put the sugar or ice in the jug before you start juicing.
1 Press a halved fruit rmly onto the cone to switch on the
appliance (Fig. 7).
2 Remove the cone and the sieve with pulp selector. Then lift the jug
from the motor unit (Fig. 8).
Note: Also remove the stirrer (HR2746 only) if you have used it.
3 Pour out the fresh juice (Fig. 9).
Tip: Clean the appliance immediately after use (see chapter ‘Cleaning’). Dried
fruit pulp is more difcult to remove.
1 Unplug the appliance.
2 Remove all detachable parts from the motor unit.
3 Separate the sieve from the pulp selector (Fig. 10).
4 Clean all detachable parts with hot water and some washing-up
liquid or in the dishwasher (Fig. 11).
5 Clean the motor unit with a moist cloth.
Never immerse the motor unit in water nor rinse it under the tap.
1 Wind the cord round the base of the appliance. Then x it with the
suction cap to the outside of the jug (Fig. 12).
2 Store the appliance in a safe and dry place.
8
Loading ...
Loading ...
Loading ...