Philips FC6842/01

User Manual - Page 12

For FC6842/01.

PDF File Manual, 192 pages, Read Online | Download pdf file

FC6842/01 photo
Loading ...
Loading ...
Loading ...
5 To remove shampoo effectively, make overlapping strokes and nish off with one stroke
across as shown in the gure. (Fig. 44)
6 After shampooing, release the trigger and press the shampoo pump on/off button to switch
off the pump. Keep the appliance itself switched on (Fig. 38).
7 Lift the nozzle off the oor. Then simply let the appliance suck in dry air for some time to dry
the inside of the suction hose and tube (Fig. 39).
8 Press the motor on/off button to switch off the appliance.

The upholstery nozzle allows you to shampoo furniture, tapestries, curtains etc.
1 Attach the upholstery nozzle directly to the handgrip (Fig. 45).
2 Shampoo the fabric in the same way as described for oors. (Fig. 46)

1 Press the motor on/off button to switch off the appliance.
2 Remove the mains plug from the wall socket.
3 You can clean all parts of the appliance, including the container, with a damp cloth.
Make sure no water enters the motor unit!

1 Empty, clean and dry the container.
2 Let the appliance suck in dry air for a few minutes to dry the inside of the tube and hose.

1 Rinse the oat unit and the foam lter (Fig. 47).
2 To guarantee an optimal lifetime for the foam lter, carefully remove it from the oat
unit (Fig. 48).
3 Clean the lter separately (Fig. 49).
Squeeze the foam lter to remove excess water. Do not wring it!

1 Rinse the double-injection nozzle under the tap (Fig. 50).
2 Remove the hard oor adapter and clean it separately (Fig. 41).
3 Fill the container with lukewarm fresh water. Pump out the water through the two shampoo
hoses into a sink or toilet. This prevents shampoo residues from caking the inside of the
hoses and clogging them up.

To extend the lifetime of the shampoo pump, clean it with a mixture of water and white
vinegar once a year.
1 Pour 1 litre of white vinegar (8% acetic acid) into the shampoo reservoir and top it up with
lukewarm fresh water.
2 Let the appliance run in shampooing mode until the shampoo reservoir is empty. Collect the
vinegar solution in a bucket.
3 Repeat this procedure with 1 litre of fresh water to rinse out any vinegar residues.
12
Loading ...
Loading ...
Loading ...