Loading ...
Loading ...
Loading ...
Installation
1.
Attach the side collars to the wheel.
2.
On the left side, place the wheel between
the fork legs and insert the lightly greased
front axle shaft to the end, through the
left fork leg and wheel hub.
3.
Align the end of the front axle shaft with
the surface of the fork leg.
4.
Tighten the left axle pinch bolt to hold the
axle.
5.
Tighten the axle bolt.
Torque: 44 lbf·ft (59 N·m, 6.0 kgf·m).
6.
Loosen the left axle pinch bolt.
7.
Tighten the right axle pinch bolt.
Torque: 16 lbf·ft (22 N·m, 2.2 kgf·m).
8.
CBR650FA only
Secure the wheel speed sensor wire with
the clamp.
20170412174947_31MJEA300_enu_BOOK Page 95 Wednesday, April 12 2017 17:58:26 JST
Tire Puncture u Removing Wheels
Troubleshooting
92
Surface of fork
leg
End of front
axle shaft
Wheel speed
sensor wire
Clamp
Loading ...
Loading ...
Loading ...