Loading ...
Loading ...
Loading ...
2 Takethemotorprotectionlterholderoutoftheappliance.Takethelteroutoftheholder
(Fig. 26).
3 Shakethelteroveradustbintocleanit.
4 Reinsertthelterintotheholderwiththewhitesidepointingtowardsthedustbag
compartment.Presstheholderdownrmlytomakesurethatittsproperlyatthebottom
(Fig. 27).
5 Place the dustbag holder with the dustbag back into the appliance (Fig. 25).
Super Clean Air lter (specic types only)
The Super Clean Air lter located in the back of the appliance lters a large part of the smaller
particles from the exhaust air with its electrostatically charged bres.
Replace the Super Clean Air lter every six months.
1 Opentheltergrille(Fig.28).
2 Removetheoldlter.
3 Insertthenewlterintotheappliance(Fig.29).
4 Closetheltergrille(‘click’)(Fig.30).
Washable Super Clean Air HEPA 12 lter (specic types only)
Instead of with the Super Clean Air lter, some types are equipped with the washable Super Clean
Air HEPA 12 lter. This lter is able to remove 99.5% of all particles down to 0.0003mm in size from
the outlet air. This not only includes normal house dust, but also harmful microscopic vermin such as
house dust mites and their excrements, which are well-known causes of respiratory allergies.
Clean the Super Clean Air HEPA 12 lter every 6 months. You can clean the washable Super Clean
Air HEPA 12 lter max. 4 times. Replace the lter after it has been cleaned 4 times.
1 Opentheltergrille(Fig.28).
2 TakeoutthewashableHEPA12lter.
3 RinsethepleatedsideoftheHEPA12lterunderahotslow-runningtap.
- Hold the lter in such a way that the pleated side points upwards and the water ows parallel
to the pleats. Hold the lter at an angle so that the water washes away the dirt inside the pleats
(Fig. 31).
- Turn the lter 180° and let the water ow along the pleats in opposite direction (Fig. 32).
- Continue this process until the lter is clean.
Nevercleanthewashablelterwithabrush(Fig.33).
Note: Cleaning does not restore the original colour of the lter, but does restore its ltration power.
4 Carefullyshakethewaterfromthesurfaceofthelter.Letthelterdryatleast2hours
beforeyouputitbackintothevacuumcleaner.
5 Placethelterbackbehindthebrackets.MakesurethatthePhilipslogoonthelteris
visibleintheupperlefthandcorner(Fig.29).
6 Closetheltergrille(‘click’)(Fig.30).
ENGLISH 9
Loading ...
Loading ...
Loading ...