Loading ...
Loading ...
Loading ...
WQP8-9325
P
88
9
Never use a spray cleaner to clean the door panel for it could damage the door lock and electrical components. It is not allowed
to use the abrasive agent or some paper towel becauseof the risk of scratching or leaving spots on the stainless steel surface.
To clean the edge around the door, you should use only a soft warm, damp rag. Toprevent
penetration of water into the door lock and electrical components, do not use a spray cleaner
of any kind.
Also, never use abrasive cleaners or scouring pads on the outer surfaces because they will
scratch the finish. Some papers towels can also scratch or leave marks on thesurface.
Something will occasionally move into the filters and the drain pump. If this occurs, the drain
pumps employed in your dishwashers are designed to automatically reverse, ejecting the
item back into the sump area or down the drain. If you have to remove an obstacle from the
drain pump, before you remove the filters, you should turn off the power; Then remove the
small black insert from the sumparea. (You might want to remove any standingwaterfirst).
Scoop out the item that is probably in the sump area and causes the obstruction. Remember
to replace the black insert before you put the filters back in.
After every wash, turn off the water supply to the
appliance and leave the door slightly ajar so that
moisture and odors are not trapped inside.
Before cleaning or performing maintenance, always
remove the plug from the socket. Do not run risks.
To clean the exterior and rubber parts of the dishwasher,
do not use solvents or abrasive cleaning products.
Rather, use only a cloth and warm soapy water.
Toremovespotsorstainsfromthesurfaceofthe
interior, use a cloth dampened with water and a little
white vinegar, or a cleaning product made specifically
for dishwashers.
When you go on holiday, it is recommened that you run a
wash cycle with the dishwasher empty and then remove
the plug from the socket, turn off the water supply and
leave the door of the appliance slightly ajar. This will help
the seals last longer and prevent odors from forming
within the appliance.
If the appliance must be moved, try to keep itin the vertical
position.If absolutely necessary, it can be positioned on
its back.
Oneof the factors that cause odors to form in the
dishwasher is food that remains trapped inthe seals.
Periodic cleaning with a damp sponge will prevent this
from occurring.
Fused electrical supply is required-copper wire only.Time delay fuse or circuit breaker recommended and provide separate
circuit serving only this appliance.Outlet should be placed in adjacent cabinet.
After making sure that the voltage and the frequency values for the current in the home correspond to those
on the rating plate and that the electrical system is sized tor the maximum voltage on the rating plate, insert
the plug into an electrical socket which is earthed properly. If the electrical socket to which the appliance
must be connected is not appropriate tor the plug, replace the socket, installed by qualified electrician, rather
then using an adaptors.
Make sure that the plug on the appliance remains accessible after installation.
WQP8-9325
P
88
9
Never use a spray cleaner to clean the door panel for it could damage the door lock and electrical components. It is not allowed
to use the abrasive agent or some paper towel becauseof the risk of scratching or leaving spots on the stainless steel surface.
To clean the edge around the door, you should use only a soft warm, damp rag. Toprevent
penetration of water into the door lock and electrical components, do not use a spray cleaner
of any kind.
Also, never use abrasive cleaners or scouring pads on the outer surfaces because they will
scratch the finish. Some papers towels can also scratch or leave marks on thesurface.
Something will occasionally move into the filters and the drain pump. If this occurs, the drain
pumps employed in your dishwashers are designed to automatically reverse, ejecting the
item back into the sump area or down the drain. If you have to remove an obstacle from the
drain pump, before you remove the filters, you should turn off the power; Then remove the
small black insert from the sumparea. (You might want to remove any standingwaterfirst).
Scoop out the item that is probably in the sump area and causes the obstruction. Remember
to replace the black insert before you put the filters back in.
After every wash, turn off the water supply to the
appliance and leave the door slightly ajar so that
moisture and odors are not trapped inside.
Before cleaning or performing maintenance, always
remove the plug from the socket. Do not run risks.
To clean the exterior and rubber parts of the dishwasher,
do not use solvents or abrasive cleaning products.
Rather, use only a cloth and warm soapy water.
Toremovespotsorstainsfromthesurfaceofthe
interior, use a cloth dampened with water and a little
white vinegar, or a cleaning product made specifically
for dishwashers.
When you go on holiday, it is recommened that you run a
wash cycle with the dishwasher empty and then remove
the plug from the socket, turn off the water supply and
leave the door of the appliance slightly ajar. This will help
the seals last longer and prevent odors from forming
within the appliance.
If the appliance must be moved, try to keep itin the vertical
position.If absolutely necessary, it can be positioned on
its back.
Oneof the factors that cause odors to form in the
dishwasher is food that remains trapped inthe seals.
Periodic cleaning with a damp sponge will prevent this
from occurring.
Fused electrical supply is required-copper wire only.Time delay fuse or circuit breaker recommended and provide separate
circuit serving only this appliance.Outlet should be placed in adjacent cabinet.
After making sure that the voltage and the frequency values for the current in the home correspond to those
on the rating plate and that the electrical system is sized tor the maximum voltage on the rating plate, insert
the plug into an electrical socket which is earthed properly. If the electrical socket to which the appliance
must be connected is not appropriate tor the plug, replace the socket, installed by qualified electrician, rather
then using an adaptors.
Make sure that the plug on the appliance remains accessible after installation.
Downloaded from www.ManualsFile.com manuals search engine
Loading ...
Loading ...
Loading ...