Loading ...
Loading ...
Loading ...
11
REMOVING THE MIXING BOWL
1. Lift up the mixer head by placing one hand
on the top of the mixer head and use the
other hand to push down on the tilt release
lever. Pull the mixer head backwards until
it is fully elevated and the mixer head is
locked into place.
2. Hold the mixing bowl and turn the bowl in
an anti-clockwise direction until the bowl
notches align with the grooves on the mixer
base. Lift the bowl from the mixer.
ATTACHING THE MIXING AND
WHISKING ATTACHMENTS
1. Using the tilt release lever, open the mixer
head into a diagonal position and lock into
place.
2. Align the groove in the top of the
attachment with the notch on the
attachment spindle
3. Push the attachment onto the spindle and
rotate the attachment in an anti-clockwise
direction. Pull the attachment downwards to
lock into position.
NOTE
It is important that the attachments are
securely locked into position on the
attachment spindle to ensure that the mixer
operates correctly.
REMOVING THE MIXING AND
WHISKING ATTACHMENTS
1. Using the tilt release lever, open the mixer
head into a diagonal position and lock into
place.
2. Holding the attachment near the
attachment spindle, push it upwards
towards the mixer head and rotate the
attachment in a clockwise direction
3. Pull the attachment downwards, releasing it
from the attachment spindle.
ATTACHING THE POURING SHIELD
By attaching the pouring shield, splattering
and splashing of ingredients can be minimized.
1. To attach the shield, ensure the speed
control dial is set to the OFF position, the
mixing bowl is securely locked into place
and the mixer head is down.
2. Slide the pouring shield onto the top of the
mixing bowl so that it fits around the top of
the attachment spindle.
3. Slide the pouring shield spout into the
grooves on the pouring shield until it is
securely in place. Mixer is now ready to
commence mixing.
LEM250_BW_IB_B16.indd 11 26/10/2016 1:01 pm
Loading ...
Loading ...
Loading ...