LED BEDLIGHT WITH SENSOR
TECHNICAL DATA:
FOR INDOOR USE ONLY
INSTALLATION INSTRUCTIONS
WARNING!
1. Please make sure to turn off the power before starting the installation.
2. The light source of this luminaire is not replaceable, when the light source reaches its end of life
the whole luminaire should be replaced.
3. Install only by certified Electrician.
In case of any query/issue with the product, please reach out to us at: support@v-tac.eu. For
More products range, inquiry please contact our distributor or nearest dealers. V-TAC EUROPE
LTD. Bulgaria, Plovdiv 4000, bul.L.Karavelow 9B
This marking indicates that this product
should not be disposed of with other
household wastes.
Caution, risk of electric shock.
PIR Sensors
Light with
interface
Dimming:
10%-100%
Power
interface
Delay time third gear switch:
30sec\130sec\380sec
CLEAN SURFACE
Before starting the installation, please
completely clean and wipe the surface
which need to be installated [Fig 2].
INSTALLATION SUGGESTIONS
After finishing the installation, please use the
right clips to fix the connection wires [Fig 4]
POWER SUPPLY
Please plug the adapter into the socket [Fig 6]
and the sensor will be automatically timing
time about 30 seconds after power on.
CHOOSE THE SENIOR INSTALLATION
POSITION
Choose a best position where the sensor will
be installed can directly feel body motion
movement or the ambient light. Advice A or
B position [Fig 4]
INSTALLATION UNDER THE BED
Place the connected components under the
bed. To ensure that the adapter is plugged
into a power socket, Otherwise, add an extra
power socket. Before installing the sensor
and strips, please tear up 3M tape adhesive
protection layer. [Fig 5]
CONNECT COMPONENTS
Opening and spreading the LED strip,
connects the sensor and adapter [Fig 3].
Option
It can be cut according to the length
which you need.
INTRODUCTION & WARRANTY
Thank you for selecting and buying V-TAC product. V-TAC will serve you the best. Please
read these instructions carefully before starting the installation and keep this manual
handy for future reference. If you have any another query, please contact our dealer or
local vendor from whom you have purchased the product. They are trained and ready to
serve you at the best. The warranty is valid for 3 years from the date of purchase. The
warranty does not apply to damage caused by incorrect installation or abnormal wear and
tear. The company gives no warranty against damage to any surface due to incorrect
removal and installation of the product. The products are suitable for 10-12 Hours Daily
operation. Usage of product for 24 Hours a day would void the warranty. This product is
warranted for manufacturing defects only.
MODEL WATTS VOLTAGE LED/M IP RATING DIMMABLE STRIP LENGTH SENSOR DISTANCE DELAY TIME
VT-8067 3W DC:12V 30 IP20 YES 1.2m x1 2-5m 30sec, 130sec, 380sec
VT-8068 6W DC:12V 30 IP20 YES 1.2m x2 2-5m 30sec, 130sec, 380sec
3
YEARS
WARRANTY
*
