iel
BDWI440 45 cm Fully
integrated full height
electronic dishwasher
USER MANUAL FOR YOUR BAUMATIC
BDWI440 45 cm Fully
integrated full height electronic
dishwasher
NOTE: This User Instruction Manual contains important
information, including safety & installation points, which will
enable you to get the most out of your appliance. Please keep it
in a safe place so that it is easily available for future reference; for
you or any person not familiar with the operation of the appliance.
JW 20/11/12
2
3
Contents
Environmental note 4
Important safety information 5 – 7
Specifications 8 – 10
Product and aperture dimensions 8
Product specifications 8
Electrical details 9
Description of the appliance 10
Control panel 10
Using your dishwasher 11 - 24
Before first use 11
Filling with dishwasher salt 11 – 12
Setting the water softener level 12
Filling with rinse aid 13
Setting the rinse aid level 14
Filling with dishwasher detergent 14 - 15
Loading the upper basket 15
Adjusting the upper basket 16 - 17
Loading the lower basket 17 - 18
The cutlery basket 18
Loading dishes and cutlery 19 - 20
Program table 20 - 21
Setting a wash program 21 - 22
Changing a wash program 22
At the end of a wash program 22
Setting a delay start 23
Adding an item to the wash 23
Rinse aid and salt indicator neons 24
Saving energy using your dishwasher 24
Cleaning and maintenance 25 - 27
The filter system 25
Cleaning the filters 26
Cleaning the spray arms 27
Cleaning the control panel 27
Cleaning the door 27
Error code failure system 28 - 29
General troubleshooting 29 - 30
Installation 31 - 41
Aperture requirements 31
Preparing and connecting the furniture door 32 - 33
Adjusting the tension of the door spring 34
Connecting to the mains water supply 34
Connecting to the water outlet 35
Connecting to the power supply 36
Applying the condensation strip 37
Positioning the dishwasher 38
Levelling the appliance 38
Securing the dishwasher 39
Before first use 39
My appliance isn’t working 40
Baumatic consumables 41
Technical data 42
Contact details 43
ENVIRONMENTAL NOTE
Note
: Before discarding an old appliance, switch off and
disconnect it from the power supply. Cut off and render any plug
useless. Cut the cable off directly behind the appliance to prevent
misuse. This should be undertaken by a competent person. Disable
the door lock to make sure that children cannot get stuck inside
the appliance.
o The packaging materials that Baumatic uses are environmentally
friendly and can be recycled.
o Please discard all packaging material with due regard for the
environment.
4
IMPORTANT SAFETY INFORMATION
Your safety is of the utmost importance to Baumatic.
Please make sure that you read this instruction booklet
before attempting to install or use the appliance. If you
are unsure of any of the information contained in this
booklet, please contact the Baumatic Advice Line.
General Safety
o Repairs to your appliance must only be carried out by a
Baumatic engineer or one of its authorised service agents. Any
attempt by an inexperienced person to repair the appliance,
could result in injury or damage to your dishwasher.
o If you notice that the mains cable is damaged. The appliance
must not be used. The same applies if you notice that the
worktop, control panel or base area is damaged. As this could
allow access to the internal components of the machine.
o The appliance should be turned off and isolated from the mains
supply, before either cleaning or maintenance work is attempted.
o The mains cable must not be used to pull the plug out of the
electrical socket.
o The machine should not be sprayed with water.
o The external surface of the appliance may become hot whilst
your dishwasher is in use.
o It is possible for small animals to chew either mains cables or
water hoses, which could cause an electric shock hazard.
Installation
o The installation instructions contained within this user manual
should be followed.
o It is obligatory for the completed installation to comply with all
relevant building regulations and local water authority
requirements.
o Before the first use of the appliance, you should follow the
steps listed in the “Before first use” section on page 11
and page 39 of this manual.
5
6
o Care should be taken not to trap the power supply cable
underneath the appliance whilst installing it.
o No attempt should be made to alter or modify the specifications
of this appliance.
In daily use
o This appliance is only designed to wash normal domestic
washloads. If you use your dishwasher in any other way or it is
incorrectly used, then Baumatic accepts no liability for any
damage that might be caused and any guarantee will be void.
o It is recommended that the appliance is unplugged and the
water supply is turned off after the machine is used.
o The detergents, rinse aid and salt that you place in this appliance
should be suitable for automatic dishwashers. With regards to
dosage levels, the detergent manufacturer’s recommendations
should be followed.
o Sharp knifes or ones with long blades are a potential safety
hazard when placed in an upright position in the cutlery basket.
We would recommend that these items are placed horizontally in
the upper basket.
o You should not wash any items that have come into contact
with corrosive, acidic or alkaline chemicals, paint, petrol, iron or
steel debris.
o You should not open the door whilst the appliance is set on a
wash program. Depending on which stage that the wash
program is at, hot water could escape the machine.
o You should not leave the door of the appliance open, unless
you are loading or unloading the dishwasher.
o You should not stand or sit on the door when it is open.
7
Child Safety
o Your dishwasher should only be used by adults. You should not
allow children in the area of the machine unsupervised. You
should not let them touch the controls or play with the appliance.
o It could be possible for a child or pet to gain access to the
dishwasher if the door is left open. Therefore please check the
inside of the appliance before setting it on a wash cycle.
o Any packaging that is removed from the machine should be kept
away from children.
o All detergents should be kept out of children’s reach in a safe
place.
o Some water will remain inside the dishwasher when it has
completed a wash cycle. This water is not suitable for drinking
and may contain residues from the detergents that are used in
the appliance.
Declaration of conformity
This appliance complies with the following European Directives:
-73/23 dated 19/02/1973 Low Voltage Directive and subsequent
modifications.
-89/336 dated 03/05/1989 Electromagnetic Compatibility Directive and
subsequent modifications.
For future reference please record the following information which can
be found on the rating plate and the date of purchase which can be
found on your sales invoice. The rating plate of your dishwasher is
located on the right hand side of the drop down door.
Model Number ……………………………….
Serial Number ……………………………….
Date of Purchase ……………………………….
Specifications
Product dimensions
Height: 820 - 880 mm
Width: 445 mm
Depth: 540 mm
Aperture dimensions
Height: 820 mm (min)
Width: 450 mm
Depth: 580 mm (min)
Product specifications
o 9 Place settings
o 6 functions: Normal
Intensive
Economy
1 Hour
Rapid
Glass
o 5 temperatures: 40°C, 50°C, 55°C, 60°C, 65°C
o Delay timer
o LED display
o Self-cleaning stainless steel micro-filter
o Anti-leak device
o Anti-flood device
o Height adjustable upper basket
o Collapsible plate racks
o Adjustable feet
o Residual drying
o Concealed heating element
o 3 in 1 option
o Noise level: 52 dB
o Low water consumption (10.5 litres)
8
9
Energy efficiency details
Energy efficiency class: A+
Washing performance class: A
Drying performance class: A
Power consumption
Off mode: 0.00 W
Left on mode: 0.75 W
Electrical details
Rated voltage: 230 Vac 50 Hz
Supply connection: 13 A (double pole switched fused outlet with
3 mm contact gap)
Optional extra
o DWD450SS- Stainless steel door with mark resistant coating and
bar handle
Description of the appliance
1) Upper basket
2) Spray arms
3) Lower basket
ner 4) Water softe
5) Main filter
dispenser 6) Detergent
7) Cup shelf
8) Cutlery basket
9) Coarse filter
10) Rinse aid dispenser
11) Drain pipe connector
2) Inlet pipe connector 1
ontrol panel C
1) ON/OFF button
2) Rinse aid and salt in
10
dicator neons
3) 3 in 1 Button
Delay start butt4) on
5) LED display
6) Program indicator neons
7) Program selection button
11
sing your dishwasher U
Before first use
Install the applianceo as per the installation instructions contained
asher salt. After this you should set the water
then set the rinse aid dosage.
illing wi
e (in particular table salt), it will damage
overflowed from the water softener during the salt
he lower
r cap
e of water into the water
softener.
o this when you fill the
h first time.
5 kg of salt into the
water softener.
within this booklet.
o Fill the water softener with 1 litre of tap water and then fill with
specialist dishw
softener level.
o Fill the rinse aid dispenser and
F th dishwasher salt
IMPORTANT: You should only use salt that is specially
designed for use in a dishwasher. If any other type of salt is
used in the applianc
the water softener.
o Ideally you should fill the water softener with salt, just before you
are about to run a wash program. This will help to clear any salt
that may have
filling process.
o Open the door of the dishwasher and then remove t
basket. The basket should be empty when you remove it.
Turn the water softeneo
anticlockwise and remove it.
Pour 1 litro
IMPORTANT: It is only necessary to d
container with salt for t e
o Pour salt into the water softener,
using the funnel that is supplied with
the appliance. You should add
approximately 1.
12
ater softener, whilst you are filling it with salt. This does not
mean that the water softener is filled with the correct amount of
t. Thereafter, when
the salt indicator neon lights on the control panel, you should follow
T: You do not need to pour 1 litre of water into
the container when you subsequently fill the water softener
wash cycle. The water softener should be set to a
vel for the hardness of
the t
o It is perfectly normal for a small amount of water to come out of
the w
salt.
o Refit and fully tighten the water softener cap.
o The salt required warning light will go out approximately 2-6 hours
after you have filled the water softener with sal
the filling with dishwasher salt procedure again.
o IMPORTAN
with salt.
Setting the water softener level
It is possible to regulate the amount of salt that the water softener will
release during a
le that is appropriate
able below).
your water (please refer to
WATER HARDNESS
Clarke
degrees
°dH German
Degrees
°TH ch
degrees
Selector
position salt used
per cycle cycles per 1
kg of salt
Fren
Grams of Approximate
number of
0-10 0-8 0-14 N/A 0 N/A
11-28 9-22 15-39 Minus symbol 20 50
29-56 23-45 40-80 Middle 40 25
57-75 46-60 81-107 Plus symbol 60 16
To alter the amount of salt that is released by the water softener, you
e lower basket and unscrew the cap from the water
Locate the ring with an arrow on it that is located
You should turn the arrow to the setting that is
The “middle” selector position is halfway between
ard water area, then you should still fill the water
e water softener arrow should be turned to the
minus setting.
should:-
o Remove th
softener.
o
on the water softener. (See figure opposite).
o
appropriate for your water hardness.
o
the minus and plus symbols.
o IMPORTANT: If you are using 3 in 1 dishwasher tablets and live in
a medium or h
softener with salt. Th
13
t
your dishes.
hese droplets will lead to spots and streaks being left on
items after the wash program has completed.
ill pop out of the hole (1). Then slowly pour in
liquid rinse aid (2), the rinse aid dispenser will hold approximately
o You should continue to fill with rinse aid, until the level indicator
this could cause
oversudsing when a wash program is selected. Wipe away any
o Replace the cap and turn it clockwise until it locks into position
You should refill the rinse aid dispenser when the rinse aid
o IMPORTANT: If you are using 3 in 1 dishwasher tablets then
you should still fill the rinse aid dispenser.
Filling wi
h rinse aid
The rinse aid is released during the final rinse and it helps
to prevent water from forming droplets on
T
o Your dishwasher is designed to utilise liquid rinse aid.
o The rinse aid dispenser is located inside the drop down door,
next to the detergent dispenser.
To access the rinse aid dispenser, you should turn the cap
anticlockwise and it w
110 ml of rinse aid.
turns completely black.
o Be careful not to overfill the dispenser, as
rinse aid excess or spillages with a damp cloth.
(3).
o
indicator neon lights on the control panel.
14
o depends on
ld experiment with the rinse aid
wash cycle, we would
recommend that the rinse aid level is set
uld turn the
arrow anticlockwise and increase the
You should continue to adjust the rinse aid level upwards until
t too high and it is causing foaming during the wash
cycle. Turn the arrow clockwise and lower the setting to the next
number.
The detergent dispenser must be refilled at the start of each wash
Open the lid that closes over the detergent dispenser (1) and
place the detergent inside of the dispenser (2).
Setting the rinse aid level
The amount of rinse aid that the dishwasher requires als
the hardness of your water. You shou
setting, until you find a level that gives the best results.
o On the first
to number 4.
o If you get water spots and poor drying
performance, then you sho
setting to the next number.
o
you get no water spots.
o If you get cloudiness or streaking on your dishes, the rinse aid
level is se
Filling with dishwasher detergent
cycle (apart from the Rinse wash program).
o
15
wash
detergent tablet should be placed
in the dispenser at any one time.
s.
ent placed in it for any wash cycle that has a pre-wash
element to it, however this is optional. This must be a liquid or
Shut the detergent dispenser lid firmly to ensure that it clips into
place
At the relevant stage of a wash cycle the lid will open and the
oading the upper basket
& mugs, saucers, plates, bowls and
wl
. Large serving bowl
. Glasses
. Saucers
. Dishes
. Dessert dishes
You should position the dishes and cookware in such a way that
they are not moved by the spray of water during the wash cycle.
guide to the most appropriate way to
load the upper basket.
o The left section displayed in the
diagram (A) is for the main
cycle detergent. Only one
If you are using detergent powder
or liquid, you should follow the
detergent manufacturer’s
recommendation
o The right section displayed in the diagram (B) can have separate
deterg
powder detergent, not another detergent tablet.
o
o
tablet/powder/liquid will enter the dishwasher.
L
The upper basket is most suited to washing delicate and light
dishware, such as glasses, cups
shallow pans (that are not heavily soiled).
1. Cups
2. Small serving bo
3
4
5
6
7
o
o Use the diagram above as a
16
The height of the upper basket can be adjusted by removing the
st remove the end caps from
the runners before removing the basket.
o IMPORTANT: The upper basket must be
mpty when you are removing it from the
uide runners.
o If the upper wheels are placed in the
o For accommodating additional tumblers, cups and mugs. You can
s
e
u
RTANT: Care should be taken when placing long
stemmed glassware, such as champagne glasses in the
upper basket
there is a risk
basket is pushed i
Adjusting the upper basket
Your dishwasher has an adjustable upper basket which you can alter to
the most suitable position for the items you are going to wash in the
upper basket.
o
upper basket from the guide runners.
o NOTE: you mu
e
g
Lower position
guide runners, then the basket is in the
lower position.
also
You
betw
the
place small, espresso sized cups on top of the side racks.
hould take care to ensure that there is enough clearance
en the top of the cups placed on top of the side racks and
nderneath of the dishwasher interior.
IMPO
. If they are not positioned correctly, then
that they may topple over when the upper
n or pulled out.
17
Upper position
o If the lower wheels are placed in
the guide runners, then the basket
is in the upper position.
the
stem of the glass rests in one of the grooves on the side flap.
ot have the side flaps in a raised position. Otherwise the
basket will not slide back into the interior of the dishwasher.
be taken to make sure that the spray
rms can move freely when items have been loaded into the
Loading the lower basket
e heavily
ucepan lids and serving dishes. You
of plates into the lower basket.
. Dessert dishes
. Serving plate
. Dinner plates
0. Soup bowls
1. Cutlery basket
epans and serving bowls must always be placed with their
bases upwards.
to allow water to run off.
o For accommodating items such as glass tumblers and wine
glasses. Wine glasses should be placed upside down, so that
o Please note that when the basket is in the upper position, you
cann
IMPORTANT: Care should
a
baskets.
The lower basket is most suited to washing
soiled items, such as saucepans, sa
can also load bowls and a variety
larger and mor
7
8
9
1
1
o Sauc
o Deep saucepans should be slanted,
18
hat can be
folded down to allow for easier loading of larger saucepans and
should be placed inside of the cutlery basket. The cutlery
e appropriate position in the lower
ons
. Serving spoon
. Gravy ladle
o For the best washing performance, cutlery should be placed
o
If the bottom of the
basket begins to deteriorate and allows items to fall through,
utlery basket to avoid injury. Long bladed knifes, etc., should
e placed horizontally in the upper basket.
o The bottom rack has prongs at the rear of the basket t
serving bowls.
The cutlery basket
Cutlery
basket should then be placed in th
basket.
1. Forks
2. Soup spoons
3. Dessert spo
4. Teaspoons
5. Knives
6. Serving fork
7
8
thr
ugh the slots in the top of the cutlery basket.
IMPORTANT: Do not allow items of cutlery to fall through
the bottom of the cutlery basket, as this may cause damage
to the spray arm and/or the cutlery.
you should replace the cutlery basket.
IMPORTANT: Place short sharp knifes, etc., handle-up in the
c
b
19
Loading dishes and cutlery
ousehold cloths, sponges or any other object that may
o Remove leftovers and soften the remnants of burnt food in pans,
t the spray arms
can move freely. If the spray arm comes into contact with any
o Cups, glasses, pans etc should all be loaded with their bases
o Cutlery and dishes should not cover each other; otherwise you
o Do not allow glasses to touch inside the dishwasher, otherwise
o Small objects can be placed inside of the cutlery basket.
he following items are NOT suitable for washing
inside a dishwasher:-
od, horn or china.
not resistant to heat.
that are bonded.
ems.
o ynthetic fibre items.
H
absorb water SHOULD NOT be washed in a dishwasher.
prior to loading dishes in the appliance.
o Once the dishwasher has been loaded, check tha
item, then you should rearrange the wash load.
upwards, so that water does not collect inside of them.
may get poor wash results.
damage may occur.
T
o Cutlery with a handle of mother-of-pearl, wo
o Plastic items that are not resistant to heat.
o Cutlery that consists of glued parts that are
o Cutlery items or crockery
o Copper or pewter it
o Lead crystal glass.
o Wooden platters.
S
The following items are not always suitable for washing
inside a dishwasher:-
20
has marked it as dishwasher safe.
can also result in discolouration.
es of glass may become dull or cloudy after a large
number of washes.
o The ECONOMY program is suitable for cleaning a typical load of
ish the n f
energy nsu
Program
o Stoneware should only be washed if the manufacturer of the
item has marked it as dishwasher safe.
o Plastic items (such as lunchboxes) should only be washed if the
manufacturer
o Glazed crockery may fade with repeated washing inside of a
dishwasher.
o Items made of silverware or aluminium can discolour when
washed inside a dishwasher.
o Any food residue should be removed from silver items
immediately, as this
o Certain typ
Program table
dirty d es and is most efficie t in terms o its combined
and water co mption.
Cycle Program
information
Description
of cycle
Detergent
pre/main
Wash
Times*
Water
(l)
Energy
(kWh)
Normal
ally
lates,
e
Rinse
s
se)
23 grams
(main
wash)
hours
on
display)
13 1.09 For norm
soiled loads,
such as
pots, p
glasses and
lightly soiled
pans,
standard
daily cycle.
Pre-rins
(50°C)
Wash
(55°C)
Rinse
(55°C)
Drying
4 gram
(pre-rin
155
Minutes
(2:35
Intensive
ith
e
Rinse
(65°C)
Drying
s
se)
23 grams
(main
wash)
hours
on
display)
16 1.13 For the
heaviest
soiled loads,
such as
pots, pans,
casserole
dishes and
dishes that
have been
sitting w
dried food
on them for
awhile.
Pre-rins
(50°C)
Wash
(65°C)
Rinse
Rinse
4 gram
(pre-rin
120
minutes
(2:00
21
Economy
**
ed
e
(50°C)
Rinse
s
(pre-rinse)
23 grams
(main
1
(2:40
hours
10.5 0.77 For lightly
soiled loads,
such as
plates,
glasses,
bowls and
lightly soil
plates.
Pre-rins
Wash
(60°C)
Drying
4 gram
wash)
60
Minutes
on
display)
1 Hour
Express
shes
that need to
27 grams
(main
60
minutes
10 0.77 For di
be rinsed
and dried
only.
Wash
(60°C)
Rinse
Rinse
(50°C)
Drying
wash)
Glass
For lightly
soiled loads,
such as
d
se
15 grams
(main
wash) (1:35
hours
display)
13 0.71
glasses,
crystal an
fine china.
Pre-rin
Wash
(40°C)
Rinse
Rinse
(60°C)
Drying
95
Minutes
on
Rapid
r
lightly soiled
(40°C)
Rinse
15 grams
(main
wash)
30
minutes
9 0.50 A shorter
wash fo
Wash
loads that do
not need
drying.
Rinse
(40°C)
The wash program times that are quoted are intended as a guide *
only. Please note that factors external to the
mperature of your water supply, your water pressure
machine, e.g. the
etc. can affect
e time it takes for the wash program to complete.
ogram for EN 50242.
a
nse aid or salt adding to it.
instructions.
tion.
te
th
** Economy is the testing pr
Setting wash program
Make sure that the before first use section has been
followed.
Check whether the appliance needs rio
Pull out the top and bottom baskets, then load them in accordanceo
with the loading
o Push the top and bottom baskets fully back into posi
o Add detergent.
o Turn the appliance on by using the ON/OFF button.
22
IMPORTANT: Wait for 5 seconds before pressing the program
Press the program selection button to choose an appropriate wash
indicator neon will light to show which program you have selected.
Select any program options that you want to use (e.g. delay start).
lock click shut.
l hear the appliance begin to fill with
water and the wash program will have started.
MPORTANT: This should only be attempted when the cycle has
rgent tablet may have
lready released or you could have hot water escaping.
Press and hold down the program selection button for 3 seconds to
choose the correct wash program.
Select any program options that you want to use (e.g. delay start).
lock click shut.
hear the appliance begin to fill with
water and the wash program will have started.
t the end of a wash program
A buzzer will sound for 8 seconds.
re unloading
the dishwasher to avoid handling items which will still be very hot
r if they
washer before unloading.
o Open the door of the appliance and unload the dishwasher.
o
selection button, otherwise the appliance may not function
correctly.
o
program for the load that you are washing. The relevant program
o
o Close the door firmly, so that you hear the door
o After a few seconds, you wil
Changing the wash program
I
only just started, otherwise the dete
a
o Slightly open the door of the appliance.
o Wait for a minute before fully opening the door to ensure the spray
arms have stopped working, and to avoid scalding.
o
cancel the wash program. Then use the program selection button to
o
o Close the door firmly, so that you hear the door
o After a few seconds, you will
A
o
o Use the ON/OFF button to switch the dishwasher off.
o We would advise waiting for at least a few minutes befo
and more susceptible to breakage. Items will also dry bette
are left for longer in the dish
23
r during a wash cycle the machine
ill pause. When you close the door the machine will continue
Slightly open the appliance door and wait for the spray arms to stop
Close the door. The appliance will resume the wash after 10
is possible to delay the start of the wash program for up to a
Pull out the top and bottom baskets, then load them in accordance
bottom baskets fully back into position.
T: Wait for 5 seconds before pressing the program
selection button, otherwise the appliance may not function
program for the load that you are washing. The relevant program
delay start button and you will see the amount of time
that you are delaying the wash program by, appear in the LED
Once the period of time that you set has passed, the dishwasher
will start the wash program that you selected.
Adding an item to the wash
NOTE: If you open the doo
w
working after 10 seconds.
o
working. This will avoid scalding by hot water.
o Fully open the door and add your required item to the basket.
o
seconds.
Setting a delay start
It
maximum of 24 hours.
o Check whether the appliance needs rinse aid or salt adding to it.
o
with the loading instructions.
o Push the top and
o Add detergent.
o Turn the appliance on by using the ON/OFF button.
o IMPORTAN
correctly.
o Press the program selection button to choose an appropriate wash
indicator neon will light to show which program you have selected.
o Press the
display.
o Close the door firmly, so that you hear the door lock click shut.
o
24
The rinse aid and salt indicator neons on the control panel will let
The
Rinse aid and salt indicator neons
o
you know when the appliance needs rinse aid or salt adding to it.
o neon indicates that you need to add rinse aid to the
appliance. You should follow the procedure outlined on page 13.
The
neon indicates that you need to add dishwasher salt to
the appliance. You should follow the procedure outlined on page 11.
using your dishwasher
o
Saving energy
Loading dishes
o Refer to the relevant section of this manual for instructions on
Only run the dishwasher when it is full for optimum energy and
Check the program table to select the most efficient program
g the cycle. That is better for the
environment and helps to cut energy costs as well as your water bill
’re on a water meter.
Clean the filters regularly both to keep the dishwasher clean and to
by when you
have finished using it. £1 billion worth of energy is wasted in the UK
ing. If you prefer to
pre-rinse, use cold water on your dishes before loading them but do
e
dirtiest dishes. Shorter cycles use less energy and work just as well.
t as well at lower temperatures.
placing items in the dishwasher for the most efficient cleaning.
o
water usage.
o
according to the size and type of the load.
o The ECONOMY program washes your items at a lower temperature
and uses less water durin
if you
Usage
o
maintain its efficiency.
o Always remember to switch the appliance off stand
every year by people leaving appliances on standby.
o You do not need to rinse dishes off before load
not waste water by letting it run continuously.
o Use the shorter and lower temperature cycles for everything but th
Modern detergents also work jus
Cleaning and maintenance
25
IMPORTANT: The appliance
from your mains supply
should be disconnected
before commencing any
Your appliance is fitted with three levels of filtering; these are located
a r f
) Coarse filter
) Fine filter
r-
-
ishwasher is not a waste disposal unit. All items being
ashed inside of the dishwasher should have food scraps
removed from them before being loaded into the appliance.
cleaning process.
The filter system
in the base of the dishw
she or ease of access.
1) Main filter
2
3
Main filter- Food and soil particles are trapped by this filter and
pulverised by a special jet on the lower spray arm.
This debris is then washed down the drain.
Coarse filte Larger items such as pieces of bone or glass, which
could clog the drain, are trapped in this filter.
Fine filter This filter holds soil and food residue in the sump
area and prevents it from being redeposited on the
dishes during a wash cycle.
MPORTANT: Whilst the filtering system is efficient, your I
d
w
26
Cleaning the filters
anti-
clockwise and then lift it
upwards. Rinse out this section
2. Pull out the main filter and rinse
3. Pull out the fine filter and rinse
this under the tap to remove any
food debris that is trapped in it.
osition.
IMPORTANT: If a glass gets smashed inside of the appliance,
u
e
IMPORTANT: THE DISHWASHER SHOULD NEVER BE
SET ON A WASH CYCLE WITHOUT THE FILTERS BEING
INSIDE OF THE APPLIANCE.
For best performance and re
thoroughly cleaned regularly (ide
sults, the entire filter assembly should be
ally after each wash cycle).
1. Turn the coarse filter
under a tap to remove any food
debris that remains in it.
this under the tap to remove any
food debris that is trapped in it.
4. Place the fine filter back in its original p
5. Place the main and coarse filter back into their original positions
in the base of the dishwasher. You must turn the coarse filter
clockwise to lock it back into position.
you m
machin
st check there is no glass in the filter before the
is used again as this can cause a drainage failure.
27
leaning the spray arms
s
d take out the washer
that sits on top of the spray arm.
.
o Rinse the spray arm thoroughly and
then reassemble the spray arm back
in its original position.
leaning the control panel
ot use any abrasive cleaner or household polish on
ither the control panel or operating parts.
control panel using a brand new damp cloth with
warm water.
leaning the door
ould use
a soft, damp cloth only.
electrical
components, DO NOT use a spray cleaner of any kind.
leaner or scouring pads on the inner
or outer surfaces, as they may cause damage to them.
C
The spray arms should
deposits from clogging the
be cleaned regularly, to prevent hard water
pray arm jets and bearings.
o To remove the spray arm, unscrew
the nut an
o Gently pull upwards to remove the
spray arm
o Wash the spray arm in warm, soapy
water and use a soft brush to clean
the jets.
C
IMPORTANT: Do n
e
o Wipe over the
C
o To clean the edge around the outside of the door, you sh
o To prevent water from penetrating the door lock or
o DO NOT use any abrasive c
28
rror code failure system E
f your appliance senses that it is not operating coI rrectly, then an error
ed below should be followed.
MAINTAINEANCE ON THE
OUR MAINS
water pressure of your mains water supply.
lean the mesh filter that sits in the inlet hose.
ushed.
ed to is turned
at there are no blockages in the drain hose or the drainage
fault code to appear, plug the machine back into your
on and wait for 5
c
a
o .
IMPORTANT: If any other fault code appears in the display
window, you should not attempt to clear it yourself and
contact the Customer Care Department.
code may appear in the display window.
The following error codes can possibly be remedied by the customer
nd the steps outlina
BEFORE COMPLETING ANY
APPLIANCE, IT SHOULD BE DISCONNECTED FROM Y
POWER SUPPLY.
E1
o Longer than expected fill time.
Check the
C
Ensure that the inlet hose is not kinked or cr
Make sure the water tap that the machine is connect
on fully.
E4
o The machine has sensed water in the base.
Check that the outlet hose is not kinked or crushed.
Check th
system that the appliance is connected to.
The drain pipe may be placed in too high a position or incorrectly.
Check the installation instructions and ensure that the installation is
orrect. c
o Once you have taken action to rectify the problem that has
caused the
mains power supply.
o Turn the machine on using the ON/OFF butt
se
o W
pr
onds.
it for a further 5 seconds before attempting to set a wash
ram, using the program selection buttong
29
OFF THE APPLIANCE;
DISCONNECT THE APPLIANCE FROM YOUR MAINS
DS DURING THE GUARANTEE
PERIOD AND FINDS THAT A FAULT HAS BEEN
N ITEM ON THE ERROR CODE LIST,
WHICH COULD HAVE BEEN CLEARED BY THE
CUSTOMER. THEN YOU MAY BE LIABLE FOR THE
COST OF THE SERVICE CALL.
al trou
PROBLEM POSSIBLE HAT TO DO
IF THE FAULT CODE REAPPEARS AFTER FOLLOWING
THE ABOVE ADVICE AND CLEARING THE FAULT
CODE. YOU SHOULD TURN
SUPPLY. THEN ARRANGE FOR AN ENGINEER TO
ATTEND THE APPLIANCE. YOU SHOULD CONTACT
THE CUSTOMER CARE DEPARTMENT ON TELEPHONE
NUMBER (0118) 933 6911.
IF AN ENGINEER ATTEN
CAUSED BY A
erGen bleshooting
CAUSE
S
W
Dishwasher
doesn’t
run
r the
ircuit breaker has
ipped
ower supply is not
witched on
losed
es that are sharing the same
rcuit with the dishwasher.
that the dishwasher is
rned on Make sure that the power
ll
Fuse blown o
c
tr
P
s
Door not c
Water pressure is
low
Replace the fuse or reset the circuit
breaker. Remove any other
applianc
ci
Make sure
tu
cord is fully plugged into the wa
socket.
Check that the door is closed
securely.
Check that the water supply is
connected properly and that the
water is turned on.
Drain pump
doesn’t stop
verflow n
run
is power to the appliance.
O The system is designed to detect a
overflow. If it does, then it will
the drain pump continuously when
there
Noise ome audible sounds
re normal
tensils are not
ecure in the baskets
small
has dropped into the
basket
ou will get a level of operating noise
uring a wash cycle, in particular
ispenser places the tablet into the
b.
nsure that everything is loaded as
er Baumatic’s loading instructions.
S
a
U
s
or something
Y
d
when food is being removed from
items and when the detergent
d
tu
E
p
30
to be
h program once a
eek. Otherwise the seal around the
Motor hums If the dishwasher is not going
used for a period of time, then you
should make sure that the appliance
is set on a was
w
motor may dry out and cause noise.
Suds in the
tub
Improper detergent
use
rinse aid
detergent tablets, in conjunction with
set correctly.
aid
or rinse aid spillages immediately.
Spilled
Ensure if you are using 3 in 1
rinse aid and salt that the levels are
Always wipe up any excess rinse
Stained tub
r interio
Detergent with
colourant was used
Use a detergent without colourant.
Dishes are not
fully dried
r is Rinse aid dispense
empty
Make sure that the rinse aid
dispenser is filled with rinse aid.
Dishes and
pans are no
clean
t
elect a more intense wash program.Improper program
Improper loading
S
Make sure that the spray arms and
the detergent dispenser are not
being impeded by large dishes.
Spots and
filming on
and
pans
hard water
glasses
Extremely
Low inlet
re
ing
Improper detergent
Incorrect salt/rinse
Refer to the relevant sections of this
ed correctly.
temperatu
Improper load
aid levels
booklet, to ensure that the
detergent, salt and rinse aid levels
are set correctly. Ensure that the
appliance is load
Steam A normal
phenomenon
latch, during drying and
You may get a small amount of
steam coming through the vent by
the door
water draining.
Black or grey
marks on
dishes
Aluminium utensils
have rubbed against
dishes
t
the appliance is loaded correctly in
Use a mild abrasive cleaner to
eliminate the marks. Make sure tha
future.
Water
standing in
the bottom of
the tub
This is normal A small amount of clean water in the
base of the appliance is not
something to be concerned about.
Dishwasher
leaks
he rinse aid
lled or rinse aid
has been spilt inside
the appliance
Dishwasher isn’t
ake care not to overfill the rinse aid
se
dsing and lead to overflowing.
Wipe away any spills immediately
with a damp cloth.
Make sure that the dishwasher is
T
dispenser is
overfi
level level.
T
dispenser. Spilt rinse aid could cau
oversu
Installation
IMPORTANT: THIS INSTALLATION MUST BE
TABLY QUALIFIED PERSON.
NLY SANCTION THE INSTALLATION
o There should be less than a 5
mm gap between the top of the
dishwasher and the underneath
of the worktop.
31
31
COMPLETED BY A SUI
BAUMATIC O
GIVEN IN THIS INSTRUCTION MANUAL. YOU
SHOULD DISPOSE OF ALL PACKAGING IN AN
ENVIRONMENTALLY FRIENDLY MANNER.
Aperture requirements
o The aperture that your
dishwasher needs to be
installed into should resemble
the one shown in the drawing
on page 38.
Installation stages
32
niture door
door spring
ater supply
6. Applying the condensation strip
o The maximum weight of the furniture door should be 5.5
kilograms. The maximum thickness of the furniture door
should be 15 mm.
e 1. Preparing and connecting th
e
fur
2. Adjusting the tension of th
3. Connecting to the mains w
4. Connecting to the water outlet
5. Connecting to the power supply
7. Positioning the dishwasher
8. Levelling the dishwasher
9. Securing the dishwasher
Preparing and connecting the furniture door
o IMPORTANT: The furniture door is not supplied with the
appliance. You should purchase one to match with the rest of
your kitchen cabinets.
33
rk
o Attach the upper
o Attach the lower
to
the slots on the
outside of the
dishwasher door.
the
covers that are
sure that you
screw them tightly
e
door.
o Replace the covers.
o Use the installation template supplie
up and then drill out the necessary
d with the appliance to ma
holes in the furniture door.
hooks onto the
furniture door.
hooks onto the
furniture door.
o Lift the furniture
door towards the
dishwasher door,
ensuring that the
upper and lower
hooks locate in
o Push the furniture door downwards
dishwasher door.
so it locks into place on the
o Open the dishwasher
door and find
located on either side
of the outer edge.
o Fully tighten the
screws into the holes.
Make
into the furnitur
34
to springs. These are set at
the proper tension, so that
to adjust the tension
ey,
tighten or slacken
rs’ spring
tension is correct
when:-
a) The door remains horizontal when in the fully opened
b) You are able to shut the door easily, by raising the door using
WARNING: If you do not adjust the tension of the door spring,
nce.
ter
supply using an old or an existing water inlet hose. The inlet hose
The inlet hose will be located inside the main
threaded
water tap (A) that has a 3/4” thread and to
n the inlet hose to the water tap
and the di
shwasher.
Adjusting the tension o
f the door spring
o The door of the dishwasher is attached
the factory to ensure that they are at
the door can open and close smoothly.
o After the furniture
door has been
fitted, you will need
of the door spring.
o Using an Allen k
rotate the adjusting
screw to either
the steel cable.
o The doo
position.
your fingers.
o
then it could cause damage to the applia
Connecting to the mains water supply
IMPORTANT: Do not connect the appliance to your mains wa
supplied with the dishwasher is the ONLY one that should be used.
DO NOT CONNEC
T THE WATER INLET HOSE TO A HOT WATER TAP.
o
compartment of the dishwasher.
o Connect the water inlet hose (C) to a
the inlet hose connector on the appliance.
o Fully tighte
Connecting to the water outlet
35
o that it cannot move whilst the dishwasher is
in use. The top of the hose should be between 40cm and 100cm
o Place the end of the drain hose on your drain pipe. Push it a
o IMPORTANT: Do not insert the drain hose too deeply into the
o NEVER EXTEND THE DRAINAGE HOSE FROM ITS ORIGINAL
LENGTH.
o Secure the drain hose to the wall as indicated in the drawing
above (A, B, C), s
from the ground.
short way down into your drain pipe.
pipe, as this may cause siphoning.
36
onnecting to the power supply
et must still be accessible
once the
oltage reaching the plug is the same as that on
the rating plate.
PLATE AS THE
INFORMATION ON IT IS IMPORTANT.
appliance must be
placed into an earthed and insulated socket.
on. A power lead of a similar type must be
used in replacement.
o Power lead type – H 0 V V – F 3G 1,5.
mmend that this appliance is
connected to an extension lead.
C
o IMPORTANT: The electrical sock
appliance is installed.
o Consult the rating plate, located on the right hand side of the
drop down door BEFORE making the electrical connections.
Ensure that the v
o DO NOT REMOVE THE RATING
o The moulded plug that is supplied with the
o Broken or damaged power leads must only be replaced by a
suitably qualified pers
o IMPORTANT: We do not reco
37
pplying the condensation strip
from your appliance, away from the
underneath of the worktop.
o The condensation strip will be located inside of your dishwasher.
rneath of the worktop is clean before
sticking the strip to it.
o Separate the backing paper away from the strip.
o Stick the condensation strip to the underneath of the worktop.
the condensation strip could
result in damage to your worktop.
A
o The condensation strip must be fitted to the underside of the
worktop to protect it against the ingress of moisture. The strip
will deflect steam that rises
o Ensure that the unde
o IMPORTANT: Failure to attach
38
o itioning the dishwasher
slide the dishwasher into position, underneath the
worktop.
Levelling the appliance
ur dishwasher must be level for it to
operate properly.
levelled, otherwise it may tip over.
djusted by using the adjusting screw at the
front of the appliance.
The front feet can be adjusted using a spanner.
l to
appliance is level.
from side to side.
from front to back.
P s
o Carefully
o IMPORTANT: Yo
o Make sure that the dishwasher is supported whilst it is being
o The rear feet can be a
o
o Use a spirit leve
check that the
o Check that the
appliance is level
o Check that the
appliance is level
39
dishwasher Securing the
The dishwasher must be secured to the worktop, this can be done
in one of two ways:-
o Standard worktop- Secure the dishwasher to the underside of
the worktop by using two wood screws.
o You should screw through the holes in the brackets at the top of
the dishwasher cabinet.
o These screws should be fully tightened.
o Marble/granite worktop- The material of the worktop will
mean that it is impossible to put a screw through the underneath
of the worktop.
o On either side of the front edge of the dishwasher cabinet, there
is a rubber stopper. You should remove the rubber stoppers, to
reveal a pre-drilled hole on either side of the dishwasher.
o Secure the dishwasher to the cupboard either side of it, by
screwing a wood screw through the pre-drilled holes into the
cupboards. These screws should be fully tightened.
o The rubber stoppers should then be refitted into their original
position.
Before first use
You should check the following before using the appliance for the first
time:-
o That the dishwasher is level and fixed in position.
o That the water tap is fully open.
o That there are no leaks at either end of the drain or inlet hoses.
o That the inlet and outlet hose are fully tightened.
o That the inlet and outlet hoses are not kinked.
o That the power is switched on.
o That the water softener has been filled with 1 litre of water and
salt.
o That the rinse aid dispenser has been filled.
My appliance isn’t working correctly
IMPORTANT: If your appliance appears not to be
operating correctly, then you should disconnect it
from your mains supply and then contact the
Customer Care Department on telephone number
(0118) 933 6911.
DO NOT ATTEMPT TO REPAIR THE APPLIANCE YOURSELF.
Please note that if an engineer is asked to attend whilst the product is
under guarantee and finds that the problem is not the result of an
appliance fault, then you may be liable for the cost of the call out
charge.
The appliance must be accessible for the engineer to perform
any necessary repair. If your appliance is installed in such a
way that an engineer is concerned that damage will be caused
to the appliance or your kitchen, then they will not complete a
repair.
This includes situations where appliances have been tiled in,
sealed in with sealant, have wooden obstructions placed in
front of the appliance, like plinths. Or any installation other
than the one specified by Baumatic Ltd. has been completed.
Please refer to the conditions of guarantee that appear on the
warranty card that you receive with the appliance.
IMPORTANT: Baumatic Ltd. operates a policy of continuous
improvement and reserves the right to adjust and modify its
products without prior notification.
40
41
Baumatic Consumables
o BC001 Degreaser for Dishwashers (200 g)
o BC002 Descaler for Washing Machines and Dishwashers (200 g)
o BC003 Ceramic Hob Cleaner (250 ml)
o BC004 Oven Cleaner (250 ml)
o BC005 Stainless Steel Cleaner and Protector (250 ml)
o BC007 E-Cloth – General Purpose Cloth
o BC008 Microwave Cover
To order a Baumatic consumable product please call 0123 5437 244
and quote the product code. You can also order online from
eshop.baumatic.co.uk
42
Technical Data
Manufacturer BAUMATIC LTD
Model Number BDWI440
Standard Place Settings 9
Energy Efficiency Class (1) A+
Annual Energy Consumption (2) 222 kWh
Energy Consumption of the Standard
Cleaning Cycle
0.77 kWh
Power Consumption of Off Mode 0.0 W
Power Consumption of Left-On Mode 0.75 W
Annual Water Consumption (3) 2940 litres
Drying Efficiency Class (4) A
Standard Cleaning Cycle (5) Economy 50°C
Program Duration of the Standard
Cleaning Cycle
160 mins
Noise Level 52 dB
Installation Type Built-in
(1) On a scale from A+++ (highest efficiency) to D (lowest efficiency).
(2) Annual energy consumption based on 280 standard cleaning cycles using
cold water fill and the consumption of the low power modes. The actual energy
consumption will depend on how the appliance is used.
(3) Annual water consumption based on 280 standard cleaning cycles. The
actual water consumption will depend on how the appliance is used.
(4) On a scale from A (highest efficiency) to G (lowest efficiency).
(5) This program is suitable for cleaning normally soiled tableware and is the
most efficient program in terms of combined energy and water consumption.
United Kingdom
Baumatic Ltd.,
Baumatic Buildings,
6 Bennet Road,
Reading, Berkshire
RG2 0QX
United Kingdom
Sales Telephone
(0118) 933 6900
Sales Fax
(0118) 931 0035
Customer Care Telephone
(0118) 933 6911
Customer Care Fax
(0118) 986 9124
Spares Telephone
(01235) 437244
Advice Line Telephone
(0118) 933 6933
E-mail:
customercare@baumatic.co.uk
spares@baumatic.co.uk
Website:
www.baumatic.co.uk
Facebook:
www.facebook.com/baumatic.uk
Republic of Ireland
Service Telephone
1-890 812 724
Spares Telephone
091 756 771
Czech Republic
Baumatic CR spol s.r.o.
Lípovà 665
460 01 Liberec 4
Czech Republic
+420 483 577 200
www.baumatic.cz
Slovakia
Baumatic Slovakia, s.r.o.
Panenská 34
811 03 Bratislava - Staré Mesto
Slovakia
+421 255 640 618
www.baumatic.sk
Germany
Baumatic Gmbh
Bachstr.10-12
D-32257 Bünde
Deutschland
+49 (0) 5223 99408 0
www.baumatic.de
Italy
Baumatic Italia S.R.L.
Via Galvani N.3
35011 Campodarsego (PD)
+3904 9920 2297
www.baumatic.it
Holland
Baumatic Benelux B.V.
Dukdalfweg 15d
1332 BH ALMERE
Nederland
+31(0)36 549 1553
www.baumatic.nl
43
47
