Loading ...
Loading ...
Loading ...
Care and cleaning
Top up with rinse aid
When the rinse aid needs topping up, the above symbol lights on the display.
Press to
open
1. Open the rinse aid compartment lid.
2. Carefully top up with rinse aid to the level
marked max.
3. Wipe up any splashes of rinse aid around
the compartment.
4. Close the lid firmly.
After topping up, it may take a while before the symbol goes out.
Top up with salt
When the salt needs topping up, the above symbol lights on the display.
Salt compartment lid
1. Unscrew the salt compartment lid.
2. Place the funnel supplied with the
dishwasher in the salt compartment top-up
hole. (Water is only needed the first time.)
3. Then add salt, a maximum of 1.0 kg, until
the compartment is full. Use large grain salt
or special dishwasher salt.
4. Wipe up any excess salt so that the lid can
be screwed on firmly.
After topping up, it may take a while before the symbol goes out.
In order to avoid rust stains a dishwashing program must be started immediately after adding
salt.
Never pour dishwasher detergent into the salt compartment. This destroys the water softener!
Cleaning the filters
Coarse filter
The coarse filter traps larger food particles, which cannot get past the drainage pump. Empty the
coarse filter when necessary.
Coarse
filter
1. Lift the coarse filter by the handle.
2. Empty the coarse filter. Remember to refit
it!
22
Loading ...
Loading ...
Loading ...