Loading ...
Loading ...
Loading ...
12
> Specifications > Settings > Listening Modes > Playback Function > Basic Manual
Troubleshooting | Appendix
Setting Item Default Value Setting Details
Height 2 80Hz (THX) Select the crossover frequency from "40Hz" to
"200Hz" to start outputting frequencies for each
channel.
"Full Band": Full band will be output.
•
"Full Band" can be selected only when "Front" is
set to "Full Band".
•
If an item cannot be selected even though
connection is correct, check that the settings in
"Configuration" - "Speaker Channels" matches
the number of connected channels.
Surround 80Hz (THX) Select the crossover frequency from "40Hz" to
"200Hz" to start outputting frequencies for each
channel.
"Full Band": Full band will be output.
•
"Full Band" can be selected only when "Front" is
set to "Full Band".
•
If an item cannot be selected even though
connection is correct, check that the settings in
"Configuration" - "Speaker Channels" matches
the number of connected channels.
Surround Back 80Hz (THX) Select the crossover frequency from "40Hz" to
"200Hz" to start outputting frequencies for each
channel.
"Full Band": Full band will be output.
•
"Full Band" can be selected only when
"Surround" is set to "Full Band".
•
If an item cannot be selected even though
connection is correct, check that the settings in
"Configuration" - "Speaker Channels" matches
the number of connected channels.
LPF of LFE 120Hz Set the low-pass filter for LFE (low-frequency
effect) signals in order to pass lower frequency
signals than the set value and thus cancel
unwanted noises. The low-pass filter will be
effective only on sources with LFE channel.
The value from "80Hz" to "120Hz" can be set.
"Off": Do not use this function
Setting Item Default Value Setting Details
Double Bass On This can be selected only when "Configuration" -
"Subwoofer" is set to other than "No" and "Front" is
set to "Full Band".
Boost bass output by feeding bass sounds from
the front left and right, and center speakers to the
subwoofer.
"On": Bass output will be boosted
"Off": Bass output will not be boosted
•
The setting will not automatically be configured
even if you performed AccuEQ Room
Calibration.
■ 3. Distance
Set the distance from each speaker to the listening position.
Setting Item Default Value Setting Details
Front Left 12' 0" / 3.60 m Specify the distance between each speaker and
the listening position.
Center 12' 0" / 3.60 m Specify the distance between each speaker and
the listening position.
Front Right 12' 0" / 3.60 m Specify the distance between each speaker and
the listening position.
Height 1 Left 9' 0" / 2.70 m Specify the distance between each speaker and
the listening position.
Height 1 Right 9' 0" / 2.70 m Specify the distance between each speaker and
the listening position.
Height 2 Left 9' 0" / 2.70 m Specify the distance between each speaker and
the listening position.
Height 2 Right 9' 0" / 2.70 m Specify the distance between each speaker and
the listening position.
Surround Right 7' 0" / 2.10 m Specify the distance between each speaker and
the listening position.
Surr Back Right 7' 0" / 2.10 m Specify the distance between each speaker and
the listening position.
Loading ...
Loading ...
Loading ...