Loading ...
Loading ...
Loading ...
18
7. When you are nished exercising, remove the
key from the console.
Step onto the foot rails, press the Stop button,
and adjust the incline of the treadmill to zero.
The incline must be at zero when you fold the
treadmill to the storage position, or you may
damage the treadmill. Next, remove the key from
the console and put it in a secure place.
When you are nished using the treadmill, press
the power switch into the off position and unplug
the power cord. IMPORTANT: If you do not do
this, the treadmill’s electrical components may
wear prematurely.
HOW TO USE A PRESET WORKOUT
1. Insert the key into the console.
See HOW TO TURN ON THE POWER on page 16.
2. Select a preset workout.
To select a preset work-
out, press the Weight
Loss Workouts or the
Performance Workouts
button repeatedly until
the desired workout ap-
pears in the display.
When you select a workout, the time, distance, and
maximum speed settings of the workout will appear
in the display for a few seconds.
3. Start the walking belt.
Press the Start button. A moment after you press
the button, the treadmill will automatically adjust to
the rst speed and incline settings for the workout.
Hold the handrails and begin walking.
Each workout is divided into 30 one-minute seg-
ments. One speed setting and one incline setting
are programmed for each segment. Note: The
same speed and incline settings may be pro-
grammed for consecutive segments.
During the workout, the
prole will show your
progress. The ashing
segment of the prole
represents the current
segment of the workout.
The height of the ash-
ing segment indicates
the speed setting for the current segment. At the
end of each segment, a series of tones will sound.
If a different speed and/or incline setting is pro-
grammed for the next segment, the speed and/or
incline setting will ash in the display to alert you.
The treadmill will then beep and automatically ad-
just to the speed and incline settings for the next
segment.
The workout will continue in this way until the last
segment of the prole ashes in the display and the
last segment ends. The walking belt will then slow
to a stop.
If the speed or incline setting for the current seg-
ment is too high or too low, you can manually over-
ride the setting by pressing the Speed and Incline
buttons; however, when the current segment of
the workout ends, the treadmill will automati-
cally adjust to the speed and incline settings
for the next segment.
To stop the workout at any time, press the Stop
button. To restart the workout, press the Start but-
ton. The walking belt will begin to move at 1 mph.
When the next segment of the workout begins, the
treadmill will automatically adjust to the speed and
incline settings for that segment.
4. Follow your progress with the displays.
See step 5 on page 17.
Current Segment
Loading ...
Loading ...
Loading ...