Loading ...
Loading ...
Loading ...
ENGLISH
6
HOW TO OPERATE
First, find a stable surface near an electrical outlet before 1.
starting. Make sure the cord is away from any water source.
It is acceptable to use an extension cord if needed.
Plug in unit at the OFF position.2.
Turn unit to ON position and allow it to run for at least 5 minutes 3.
before adding hard candy. If using sugar, allow it to run for 10 minutes
before adding sugar. This will allow the Extractor Head to heat.
Turn unit OFF and place no more than two pieces of hard candy or one scoop of 4.
flavored sugar (1 tbsp.) into the Extractor Head. Make sure the candies are evenly
placed on either side of the Extractor Head (see image below).
Switch to ON position.5.
When you see the cotton candy web begin, collect the cotton 6.
candy on the cone by holding the cone vertically. Rotate the
cone with your fingers while you circle the bowl.
Once cotton candy has collected on the cone, hold the cone in a horizontal
7.
position over the Extractor Head while still rotating the cone with your fingers.
Continue turning the cone with your fingers while the cone is in the horizontal
position and move from side to side making sure to collect all the cotton candy.
Repeat above steps by adding another measure of candy into 8.
the Extractor Head and starting again. The cotton candy should
flow more quickly as the unit is sufficiently warm.
DO NOT overfill the Extractor Head by adding more than two candies 9.
at a time. This will cause clogging and unit will not work properly.
By following these simple instructions, using your RETRO SERIES™ HARD
10.
& SUGAR-FREE COTTON CANDY MAKER will be a fun experience for kids
of all ages and will bring the excitement of a carnival to any occasion.
Loading ...
Loading ...
Loading ...