Philips Fidelio HTB9225D/12 2.1 3d Bluray Home Theatre

User Manual - Page 22

For HTB9225D/12.

PDF File Manual, 46 pages, Read Online | Download pdf file

HTB9225D/12 photo
Loading ...
Loading ...
Loading ...
20 EN
3 Select a picture, and then press (Play) to
start the slideshow.
4 Press to stop slideshow.
5 Press again to stop music.
Note
Make sure that the picture and audio formats are
supported by your home theater (see 'File formats' on
page 31).
Radio
Listen to FM radio on your home theater, and
store up to 40 radio stations.
Note
AM and digital radio are not supported.
If no stereo signal is detected, you are prompted to
install the radio stations again.
1 Connect the FM antenna to the
ANTENNA FM 75
on your home
theater.
For the best reception, place the
antenna away from your TV or other
sources of radiation.
2 Press (Home).
3 Select [Radio], and then press OK.
4 Select [FM Radio], and then press OK.
» If you have already installed the radio
stations, the last channel that you
listened to is played.
» If you have not installed any radio
stations, follow the message displayed
on the screen to install radio stations.
5 Use the remote control to listen or to
change radio stations.
You may also follow onscreen
instructions for radio operation.
Play buttons
Button Action
/
or
Alphanumeric
buttons
Select a preset radio station.
Navigation
buttons
Left/Right: Search for a radio
station.
Up/Down: Fine tune a radio
frequency.
Press to stop the installation
of radio stations.
BACK Exit the radio mode.
SUBTITLE Toggle between the stereo
and mono sounds.
Tuning grid
In some countries, you can toggle the FM tuning
grid between 50 kHz and 100 kHz. When you
switch the tuning grid, all preset radio stations
are erased.
1 Press (Home).
2 Select [FM Radio], and then press OK.
3 Press and hold (Play) to toggle between
50 kHz or 100 kHz.
MP3 player
Connect a MP3 player to play audio les.
What you need
An MP3 player.
A 3.5mm stereo audio cable.
1 Using the 3.5mm stereo audio cable,
connect the MP3 player to the AUDIO IN
connector on your home theater.
If you use 6.5mm stereo audio cable,
connect the MP3 player to your
home theater using a 3.5mm - 6.5mm
converter jack.
Loading ...
Loading ...
Loading ...