Loading ...
Loading ...
Loading ...
49-85219-1
5
PRODUCT DIMENSIONS AND CLEARANCES FOR 36” MODELS
35-7/8” Width
8-1/2”
Height
Universal Utility Locations
2”
17”
16”
Locate gas
inlet on back
wall or on
floor 2” from
back wall.
22-3/4” Min.
2-1/2”
8”
1/2”
12” Minimum
Each Side
35”
* The opening between a 4” high
backsplash must be 36” to allow
the rangetop to slide back against
the wall.
13” Max.
18” Min.
48” Minimum
to Combustibles
12” Minimum to
Adjacent Wall
WARNING:
Installations without a hood
require 48
”
minimum to combustibles
above the rangetop. A custom hood
installation with exposed horizontal
combustible surfaces must have
an Auto-On feature. Refer to hood
installation instructions for specific
hood clearances.
The surface of the entire back wall
above the countertop and below the
hood must be covered with a non-
combustible material such as metal,
ceramic tile, brick, marble or other
stone.
*36”
Non-
combustible
material
27-1/2” to
Front of
Bullnose
48” Min. to
Combustibles
0”
Clearance
12” Minimum to
Combustibles or 0”
to non-combustible
material above the
cooking surface
36”
ADDITIONAL CLEARANCES:
Allow 12” minimum clearance to an
adjacent wall on each side.
Working areas adjacent to the rangetop
should have 18” minimum clearance
between countertop and the bottom of
the wall cabinet.
For island installation, maintain 2-1/2
in. minimum from cutout to back edge
of countertop and 3 in. minimum from
cutout to side edges of countertop (see
top view).
Back
3” Min.
Island
Cutout
Top View
3” Min.
2-1/2” Min.
Design Information
Loading ...
Loading ...
Loading ...