UX-A255 User Manual

Loading ...

Setting the Reception Mode

Your fax has three modes for receiving incoming faxes:

FAX mode:

Select this mode when you only want to receive faxes on your line. The fax

machine will automatically answer all calls on four rings and receive incoming

faxes.

TEL mode:

Select this mode when you want to receive both phone calls and faxes on the

line connected to the fax machine. All calls, including faxes, must be

answered by picking up the fax machine's handset or an extension phone

connected to the same line.

TAD mode:

Select this mode when you go out and want the built-in answerig machine to

answer all calls. Voice messages will be recorded, and fax messages will be

received automatically (“TA D” stands for “Telephone Answering Device”.)

Setting the reception mode

Make sure a document is not loaded in the document feeder, and then

press until the arrow in the display points to the desired mode.

RESOLUTION/

RECEPTION MODE

Note: TAD mode cannot be selected unless a general outgoing message has

been recorded as explained on page 33.

For more information on receiving faxes in FAX and TEL modes, see Chapter

5, Receiving Faxes. For more information on using TAD mode, see Chapter 3,

Using the Answering Machine.

FAX

TEL

JAN-01 10:30

FAX

TEL

JAN-01 10:30

FAX

TEL

JAN-01 10:30

TAD

5 6

2 3

RESOLUTION/

RECEPTION MODE

RESOLUTION/

RECEPTION MODE

all.bookPage20Tuesday,October9,20016:14PM

Loading ...

User Manual - Page 22