Loading ...
Loading ...
Loading ...
Light
Pull Chain
INSTALLATION WITHOUT LIGHT KIT
16
Screw Washer
29. Align the notch in the switch housing cap with
the reverse switch. Then lift the switch housing
cap into the switch housing and re-insert the
three screws and washers that were previously
removed. Use a Phillips screwdriver (not included)
to secure all screws. Plug the hole in the switch
housing cap with the plastic cap (Fig.29).
Fig. 29
Fig. 28
Switch
Housing
Cap
Switch
Housing
Cap
Notch
Plastic Cap
Reverse
Switch
Light Kit
Hex Nut
Screw
and
Washer
Plastic Cap
28. (Optional) To install the fan without a light kit:
Unscrew the hex nut located inside the switch
housing cap from the threaded rod in the center
of the cap to remove the light kit from the switch
housing cap (Fig. 28).
Loading ...
Loading ...
Loading ...