Loading ...
Loading ...
Loading ...
Place the blower unit back into the opening.
WARNING:5LVNRIHOHFWULFVKRFN
can cause injury or death. Do not pull or stretch
WKHEORZHUXQLWZLULQJ0DNHVXUHWKHZLUHGDUH
not pinched.
5
4
AFTER: Fan Blade
Openings Facing
Forward
ADAPTING BLOWER
FOR RECIRCULATION
C3
20
NOTE: The exhaust adaptor with damper is not
needed for recirculating models. You may want
to save them for possible future use.
Carefully pull out the blower unit. The wires
will extend far enough to allow you to adjust
the blower unit.
NOTE: Make sure wires remain routed in the grooves
of the motor frame.
Installation Instructions
1
Blower Plate
Blower
Motor Screw
BEFORE: Fan Blade
Openings Facing Up
2
End B
End A
Carefully pull out the blower unit. The wires
will extend far enough to allow you to adjust
the blower unit.
Roll the blower unit 90° so that fan blade openings
are facing out the back of the oven.
3
Back of
Oven
Back of
Oven
Blower Plate
Back of
Oven
Screw
Close the blower plate. Secure with the screw
removed earlier.
Loading ...
Loading ...
Loading ...