Loading ...
Loading ...
Loading ...
70
CORSAIR VENGEANCE K70 RGB KEYBOARD MANUAL
Note: In the lighting grid, the X-axis represents
the percentage of the total duration specified
in the End field� For example, if the End field is
set to 10 seconds, and you have created a red
light that starts at the 4th mark on the X-axis
and goes to the 6th mark on the X-axis, when
the lighting effect activates, the red light will
start on the 4th second and last 2 seconds� If
you change the End field to 20 seconds, the
red light will start on the 8th second and last 4
seconds�
3� In the End field, type the number of seconds
you want the lighting effect to last� You can
set a maximum time of 99 seconds�
4� When you are finished editing the lighting effect,
click OK�
You can use multiple colors within a single lighting
effect� If the first light you define takes up less than
100% of the total duration, you can add an additional
color to the lighting effect by repeating the steps
above� You can also duplicate lights, copy and paste
lights, and delete lights�
LIGHTING OVERVIEW
(Continued)
Duplicating a Light
1� In the lighting grid, right-click the color bar,
and then click Duplicate�
2� A color bar of identical color and intensity will
appear in the lighting grid� The duration may
be different� Adjust the start and end markers,
intensity, and color, as needed�
Copying and Pasting a Light
If you have two or more light bars in the lighting
grid, you may copy the color from one and paste it
into another�
1� In the lighting grid, right-click the source color
bar, and then click Copy.
2� Right-click the destination color bar, and then
click Paste.
3� The destination color bar will change to the
pasted color, but duration and intensity will
remain the same� Adjust the start and end
markers, intensity, and color, as needed�
Deleting a Light
In the lighting grid, right-click the color bar, and then
click Delete�
LIGHTING
ASSIGNMENTS
PART ONE
Loading ...
Loading ...
Loading ...