Loading ...
Loading ...
Loading ...
Wheels
90
Servicing Your Honda
Wheels
Refer to Safety Precautions on page 25.
Keeping the wheels true (round) and maintaining
correct spoke tension is critical to safe motorcycle
operation. During the first few rides, spokes will
loosen more rapidly due to the initial seating of the
parts. Excessively loose spokes may result in
instability at high speeds and the possible loss of
control. It’s also important that the rim locks are
secure to prevent tire slippage.
It is not necessary to remove the wheels to perform
the recommended service in the Maintenance
Schedule (pages 27 and 28).
However, information for wheel removal is
provided for emergency situations.
1. Inspect the wheel rims (1) and spokes (2) for
damage.
2. Tighten, any loose spokes and rim locks (3) to
the specified torque:
Spoke: 2.7 lbf·ft (3.68 N·m, 0.4 kgf·m)
Rim Lock: 9 lbf·ft (12 N·m, 1.2 kgf·m)
3. Check wheel rim runout. If runout is
noticeable, see the Honda Service Manual for
inspection instructions.
See the Honda Service Manual for inspection
information:
1. Check the axle shaft for runout.
2. Check the condition of the wheel bearings.
Wheel Rims & Spokes
(1) wheel rim
(2) spokes
(3) rim lock
(1)
(2)
(3)
Axles & Wheel Bearings
Loading ...
Loading ...
Loading ...