Loading ...
Loading ...
Loading ...
- 16 -
�
Fig.4: Take the air diverter A and drill two holes as
shown in the gure (hole diameter: 1/4" inches).
Once the two holes have been drilled, fasten the
air diverter A to the bracket H.
Fig.3: Put together the two parts of
the air deviator as shown in picture
no 3.1. It may be necessary to cut
the deviator to fit the width of the
chimney as shown in picture 3.2 A
sharp blade or Hacksaw is recom-
mended to trim the plastic.
Fig.1: Remove the 2 screws E and have the top ue F go
into the bottom ue G. Remove the two ues F/G and
place them on a at surface.
Fig.2: Make a mark on the
wall and then drill a hole
1/4" inches away from
the middle of the brack-
et. Insert the expansion
plug.
Loading ...
Loading ...
Loading ...