Loading ...
Loading ...
Loading ...
9
English
Note: Spills can occur during cleaning, moving or refilling the Water
Tank, so be careful to avoid spills when doing these activities.
1. Unplug humidifier and place on a level surface.
2. Remove Water Tank from the base by grasping the top integrated
handle and pulling up towards you (A). CAUTION: When removing
Water Tank lift vertically, do not twist tank while still in base or
Cap may disengage and leak.
3. Turn the Water Tank upside down and remove the Cap by turning it
counterclockwise (B).
4. Gently place Water Tank on a flat surface and fill with cool tap
water (C).
5. Ensure Gasket, the rubber ring around the Water Tank, is properly
positioned. Insert the Cap into the grooves of the tank and turn
clockwise until tightened.
6. Lower Water Tank into Base, positioning Water Tank around the
ledge for secure placement (D). Once in nested position, water outlet
valve inside Cap opens, releasing water into Base.
Note: When the Water Tank level is low, the light on the side of the
humidifier will pulsate until it is refilled. This feature can be turned off
and on by holding both the - / + buttons for five seconds. This function
does not apply when in Continuous (CO) mode.
FILLING WATER TANK
C
A B
D
²
Gasket Ring
²
²
Loading ...
Loading ...
Loading ...