ElectriQ ECOSILENT14HPW 14000 BTU Portable Air Conditioner

User Manual - Page 8

For ECOSILENT14HPW.

PDF File Manual, 25 pages, Read Online | Download pdf file

ECOSILENT14HPW photo
Loading ...
Loading ...
Loading ...
6
INSTALLING THE HEPA FILTER (OPTIONAL)
The air conditioner can accommodate a HEPA filter which will purify the
air expelled back into the room in any operating mode. These can be
purchased from the stockist using the code: FIL-ECOSILENTHEPA.
The HEPA filter should be unwrapped and installed in the upper air inlet.
To install, remove the upper filter frame from the air conditioner by
pressing the two clips on the top of the filter frame. Place the HEPA filter
within the filter frame before refitting onto the unit.
In order to maintain performance, the filter should be regularly
vacuumed. The filter should be replaced every six months, depending on
usage and air quality.
NOTES:
The window kit is only designed to be installed with sliding or sash windows or doors. The window
kit is not designed or to be used with any other style of windows.
The fish tail adaptor can be used without the slide bar with most windows / doors.
When using the air conditioner ensure that the opening left around the fishtail is as small as
possible to ensure the unit performs efficiently.
The best form of installation is through a wall duct. By properly venting you expel hot air from your
room while efficiently cooling it.
Your air conditioner should be used without the vent pipe in dry mode. When using dry mode
ensure that an external water tank is used, monitored and regularly emptied before overflowing.
Permanent plumbing can be also installed for dry mode or an external uplift water pump can be
set up for unattended use.
IMPORTANT SAFEGUARDS
The length of the soft hose extends from approximately 35 cm to 200 cm. If hose is extended above this
length, the unit may malfunction which can invalidate the warranty. The outlet vent must be well
ventilated and not obstructed as this will cause the unit to overheat. Keep the hose as straight and short as
possible and avoid bending the air hose by more than 30 degrees in order to maintain the performance of
the unit. Excessive bends in the hose may prevent the unit from expelling the hot air, which can lead to
internal damage which would invalidate the warranty.
Loading ...
Loading ...
Loading ...